Accxes postscript printer driver for windows 2000/xp/2003 for accxes 12.0 (8 pages)
Summary of Contents for Xerox 6030
Page 1
6030/ 6050/ 6050A/ 510 Series / 721P/ 6204 WIDE FORMAT COPY SYSTEM User Version 12.5, August 2007 701P47272 Guide...
Page 2
Printed in the United States of America. XEROX® and all Xerox product names mentioned in this publication are trademarks of XEROX CORPORATION. One or more of the fonts listed within this document may be a registered trademark of Morisawa &...
Switching on the Scan System...24 ...26 ONTROLLER OWER WITCHES Switching on the PUN or YKE Controller and the Printer (XEROX WIDE FORMAT 510 Series/721P)...26 Switching on the Printer and the Controller (PUN, YKE, YKE-N, and FRX controllers) ...27 6204 W...
Page 4
Preparing to build the set ...75 Building and printing the set ...75 ...77 ATCH KEY ...78 RANSFORM KEY Margins ...78 Justification ...80 Transform ...81 ...84 AMPLE KEY Copy Mode Sample: ...84 Scan Mode Sample: ...84 ...54 ...55 ...56 XEROX WIDE FORMAT COPY SYSTEM...
Page 5
SCANNING TO THE NETWORK (SCAN MODE)...87 MAIN MENU...95 JOB ACCOUNTING...139 CLEANING AND MAINTENANCE - SCAN SYSTEM ...143 PROBLEM SOLVING ...147 SPECIFICATIONS ...163 XEROX WIDE FORMAT COPY SYSTEM (SCAN CANNING TO THE ETWORK COPY WITCHING BETWEEN MODE AND READY TO SCAN...
Page 6
• Table of Contents 1: S PPENDIX CANNING ESOLUTIONS AND 2: P ...166 PPENDIX APER HEET IZES 3: P ...168 PPENDIX APER IZES 4: LED S PPENDIX TATUS NDICATORS 5: M PPENDIX TRUCTURE ...165 PEEDS ...169 ...170 XEROX WIDE FORMAT COPY SYSTEM...
Read these safety notes carefully before using this product to ensure that you operate the equipment safely. Your Xerox/Fuji Xerox product and recommended supplies have been designed and tested to meet strict safety requirements. These include safety agency approval, and compliance with established environmental standards.
Page 8
Do not use aerosol cleaners, because they may be explosive and flammable under certain circumstances. viii • Safety Notes XEROX WIDE FORMAT COPY SYSTEM...
WARNING – Electrical Safety Information • • If this machine needs to be moved to a different location, contact a Xerox service representative or your authorized local representative or service support • • • • • • • Disconnect Device The power cable is the disconnect device for this equipment.
Operational Safety Information To ensure the continued safe operation of your Xerox/Fuji Xerox equipment, follow these safety guidelines at all times. Do These: Do Not Do These: x • Safety Notes Always connect equipment to a correctly grounded power outlet. If in doubt, have the outlet checked by a qualified electrician.
If you need additional information about ozone, please request the Xerox publication Ozone by calling 1-800-828-6571 in the United States and Canada. In other markets please contact your Authorized Local Dealer or Service Provider.
Changes and modifications to this equipment not specifically approved by Xerox/Fuji Xerox may void the user’s authority to operate this equipment. Shielded interface cables must be used with this equipment to maintain compliance with FCC regulations in the United States and the Radiocommunications Act 1992 in Australia/New Zealand as applicable.
Xerox ENERGY STAR equipment is preset at the factory to enter a “low power” state and/or shut off completely after a specified period of use. These energy-saving features can reduce product energy consumption in half when compared to conventional equipment.
Page 14
Copier, printer, digital press, and fax products must meet energy efficiency and emissions criteria, and exhibit compatibility with recycled supplies. Currently, Environmental Choice has more than 1600 approved products and 140 licensees. Xerox has been a leader in offering EcoLogo approved products. XEROX WIDE FORMAT COPY SYSTEM...
Series, 721P, 6030/6050/6050A, and 6204 with version 12.5 FreeFlow Accxes firmware loaded into the Controller. NOTE: For the 6030/6050/6050A printers that want to use the FreeFlow Accxes firmware features, the printer also needs to be connected to a separate PUN, YKE, or FRX controller, referred to as the FreeFlow Accxes Print Server.
Feature Keys Print and Copy feature keys are standard for all printers using FreeFlow Accxes 12.5 firmware, except for the XEROX WIDE FORMAT 6030/6050 Printer. In the 12.5 firmware, the following feature keys need to be loaded before the features can be used. See the Feature Key instructions and Coupon Exchange screens on the website.
NOTE: The Special Features Key section of this document refers to physical buttons (keys) that are on all the XEROX WIDE FORMAT Scan Systems. Scan System standard components The illustrations below show the components of the WIDE FORMAT SCAN SYSTEM. These components are standard on the XEROX WIDE FORMAT COPY SYSTEM 6030/6050/6050A, 6204, and 510 Series.
Page 18
If the document slides past the Feed Rolls into the Document Handler, lower the Lever to the next position. The Stand is standard with the XEROX WIDE FORMAT COPY SYSTEM 6030/6050/6050A, 6204, and 510dp series. It is optional with the 721P.
Page 19
NOTE: Components shown above with the exception of the Standard Organizer are also available on all WIDE FORMAT SCAN SYSTEMS XEROX WIDE FORMAT COPY SYSTEM extensions at its end that can be pulled out to accommodate longer documents (up to size E or A0).
Page 20
System and the Controller. Plug one end of the cable into either one of the IEEE 1394 connections at the rear of the Scan System. Plug the other end into the IEEE 1394 connection on the Controller. XEROX WIDE FORMAT COPY SYSTEM...
The illustrations show the optional compact Stacker and organizer that are available for the WIDE FORMAT SCAN SYSTEM. The compact components allow the XEROX WIDE FORMAT COPY SYSTEM to be installed in sites where space requirements are at a premium.
It is divided into three areas - Media Selection, Image Quality, and Reduce/Enlarge. To select an option, press the key(s) beneath the option. In some cases, a screen requiring a selection or input is displayed on the graphical XEROX WIDE FORMAT COPY SYSTEM...
Media Selection to select the media Source, Type, and Output Format. The illustration below depicts the Media Selection portion of the control panel. XEROX WIDE FORMAT COPY SYSTEM Control Panel Options Area Media Selection Area Getting to know the WIDE FORMAT COPY SYSTEM • 9...
Page 24
For most documents, the Scan System is able to automatically detect the width of the scanned document. This permits the Auto function to automatically select the most appropriate roll of media. XEROX WIDE FORMAT COPY SYSTEM...
Page 25
To select the Preset mode: XEROX WIDE FORMAT COPY SYSTEM 1. Press the key beneath Output Format until the Manual indicator lamp illuminates. The CUSTOM OUTPUT FORMAT screen is displayed.
Page 26
8.5 X 11 ANSI A Preset Output Format screen 2. Press the Previous or Next key to select an item from the list. 3. Press the Enter key to confirm the choice and return to the READY screen. XEROX WIDE FORMAT COPY SYSTEM...
Normal, Line, Photo, or Color Type. If the SCAN SYSTEM is not at the required version, there will be an error message. XEROX WIDE FORMAT COPY SYSTEM Image Quality Area Getting to know the WIDE FORMAT COPY SYSTEM • 13...
Normal and Photo LED's will be lit when Color is selected. The selections that appear on the screen depend on the FORMAT and COMPRESSION selections. Getting to know the WIDE FORMAT COPY SYSTEM • 15 XEROX WIDE FORMAT COPY SYSTEM...
(e.g., the lead edge contains a black border). • Maps with grayscale or color content may copy best in this mode. • To retain more light color information, such as light gray or yellow. XEROX WIDE FORMAT COPY SYSTEM : TIFF FORMAT: : TIFF FORMAT: JPEG FORMAT:...
Background Suppression selections. The feature operates with all four Background Suppression modes. NOTE: Copy is not selectable in Color mode. XEROX WIDE FORMAT COPY SYSTEM (Light) This setting works best for documents on translucent or transparent media, such as vellum (tracing paper) or film, or with medium levels of colored background on opaque media or for documents.
To select the Manual mode: 18 • Getting to know the WIDE FORMAT COPY SYSTEM Reduce/Enlarge Area 1. Press the key beneath Reduce/Enlarge until the Manual indicator lamp illuminates. The MANUAL REDUCTION/ENLARGEMENT screen is displayed. XEROX WIDE FORMAT COPY SYSTEM...
Page 33
To select the Preset mode: NOTE: If the indicator lamp is already lit, press the key once to display the screen. XEROX WIDE FORMAT COPY SYSTEM MANUAL REDUCTION/ENLARGEMENT ENTER (25.0 – 400.0): Manual Reduction/Enlargement Screen 2. Enter a reduction/enlargement between 25 and 400. You can select any value between these limits in 0.1% increments.
3. Press the Enter key to confirm your choice and return to the READY screen. The READY screen now displays the new reduction/enlargement percentage. READY TO COPY INSERT DOCUMENT AUTO 100.0 Next Menu Previous Navigational Keys and Graphical Display Area XEROX WIDE FORMAT COPY SYSTEM Mode Enter Exit...
Page 35
“Scanning to the Network” section for more information about the SCAN mode. NOTE: The SCAN mode is an optional feature that is enabled by installing the Scan-to-Net feature key. Contact your XEROX representative for ordering information. XEROX WIDE FORMAT COPY SYSTEM...
When in READY TO SCAN mode, pressing this key brings up the CLEAR SCANNED IMAGE screen. Sample A B C D E F M N O J K L W X Y T U V C/CA Start XEROX WIDE FORMAT COPY SYSTEM...
For detailed operating instructions about the Printer and Controller components of the WIDE FORMAT COPY SYSTEM and about network connectivity, refer to the documentation listed below. XEROX WIDE FORMAT COPY SYSTEM • When in READY TO BUILD SET mode, pressing this key brings up the scanned document (Refer to Sets Build key section of this manual for additional information).
Printer Control Panel or on the Web Print Management Tool. For the XEROX WIDE FORMAT COPY SYSTEM 6030/6050/6050A, 721P, and 6204, you can only set this parameter from the Web Print Management Tool, (Configuration > Printer > Printer Setup >...
Page 39
When the Scan System is switched on, the fluorescent lamp inside the Scan System illuminates immediately. If the lamp does not illuminate, refer to the "Problem solving" section of this guide. XEROX WIDE FORMAT COPY SYSTEM SCAN SYSTEM Power Switch Power Switch for the Scan System Getting to know the WIDE FORMAT COPY SYSTEM •...
Controller Power Switches The YKE and the PUN Controller has its own power switch. First power on the Controller, and then power on the Printer. YKE Controller Power Switch Power Switch location on the PUN Controller XEROX WIDE FORMAT COPY SYSTEM...
2. Power on the Scan System. 3. Wait for the “P” to be displayed in the Status Indicator window of the 4. Power on the Controller. XEROX WIDE FORMAT COPY SYSTEM Scan System. Getting to know the WIDE FORMAT COPY SYSTEM • 27 Power Switch location on the YKE-N and FRX Controller.
Page 42
28 • Getting to know the WIDE FORMAT COPY SYSTEM 510 Series Power Switch 721P Series Power Switch XEROX WIDE FORMAT COPY SYSTEM...
Page 43
Xerox 6030/6050/6050A Wide Format Power Switch Xerox 6204 Wide Format Power Switch Note: The controller manages the power supplied to the Printer or Copier/Printer. XEROX WIDE FORMAT COPY SYSTEM Getting to know the WIDE FORMAT COPY SYSTEM • 29...
Powering the Xerox 6204 Wide Format Solution On/Off The following describes the procedure for powering the Xerox 6204 Wide Format Solution with FreeFlow Accxes Print Server on and off. 1. Move the printer circuit breaker switch up, to the On [...
Scan System Warm-up XEROX WIDE FORMAT COPY SYSTEM The [Power Off] screen will display briefly on the control panel, and then the control panel and the printer will shut down. The controller will complete its shutdown within 30 seconds from the moment the control panel and printer shut down.
Page 46
Power On/Off Switch Photo 32 • Getting to know the WIDE FORMAT COPY SYSTEM XEROX WIDE FORMAT COPY SYSTEM...
It cannot make adjustment from the left side to the right side of the document. For example, if the input document is dark, DYNAMIC BACKGROUND XEROX WIDE FORMAT COPY SYSTEM • When DYNAMIC BACKGROUND REMOVAL is enabled, the...
The PRODUCTIVITY mode can be enabled/disabled at anytime. Refer to "Scan System Control" in the "Main Menu" section of this manual for more information. 34 • Document quality XEROX WIDE FORMAT COPY SYSTEM...
A bad quality document has one or more of the following problems: XEROX WIDE FORMAT COPY SYSTEM 4" • The contrast between the foreground (the image of interest) and the background is high.
Finally, sort the documents by size or series (ANSI, ARCH, etc.). This minimizes the number of times you will need to change the Media Selection, Output Format settings when using preset or custom format sizes. XEROX WIDE FORMAT COPY SYSTEM...
Normal. Select Photo for other translucent photo and select Line for media line drawing. Use Normal for mixed documents. XEROX WIDE FORMAT COPY SYSTEM Second step to try Third step to try Mode Scan: Set Original Set Original Type to Type to Color.
Menu options that can be used in some copy jobs to improve the image quality. Press the Menu key and scroll to CONFIGURATION > IMAGE ENHANCEMENT. The illustration below depicts the Image Quality portion of the Control Panel. XEROX WIDE FORMAT COPY SYSTEM Image Quality Area Image Quality • 39...
To select the document type, press the key beneath the Type settings until the desired Type indicator lamp illuminates. NOTE: The SCAN OPTIONS will not be displayed unless the Scan-to- Net feature is installed. To order this feature, contact your XEROX representative. COPY MODE The Type settings are: Normal, Line, and Photo.
MAXIMUM COPY LENGTH – To see what your Scan System’s maximum copy length is, select the Menu key > Configuration > Copy Options > Imaging > Maximum Copy Length. The default is 100 feet. For the 6030/6050/6050A, the scanned copy would get cut off at 3 meters. IMAGE ENHANCEMENT...
SCAN MODE NOTE: SCAN mode will not be displayed unless the Scan-to-Net feature is enabled. To order this feature, contact your XEROX representative. Normal mode attempts to reproduce the document being scanned to provide the best image quality including halftones and shadings as well as fine lines.
When Photo is selected in the Scan Mode, the screen below will be displayed. The screen provides additional options for the user. The SCAN OPTIONS (PHOTO) menu allows you to perform the following functions: XEROX WIDE FORMAT COPY SYSTEM SCAN OPTIONS (LINE) PREVIEW FORMAT: Scan Options (Line) Screen 1.
Page 58
NOTE: This option will not be displayed unless the Scan-to-Net feature is enabled. To order this feature, contact your XEROX representative. NOTE: The Background Suppression option cannot be used with the Photo setting. If Photo is selected, Background Suppression is automatically set to Off.
The options available for selections displayed on the screen will change depending on the FORMAT and COMPRESSION that are selected. Listed below are the selections and available options and their definition: XEROX WIDE FORMAT COPY SYSTEM 1. Press the Mode key. The Please Enter Directory screen is displayed.
Page 60
NORMAL - Saves a document at an average compression ratio and has average image quality. • BEST COMPRESSION - Saves a document at a higher compression ratio but has a lower image quality XEROX WIDE FORMAT COPY SYSTEM : TIFF FORMAT: JPEG FORMAT:...
Page 61
XEROX WIDE FORMAT COPY SYSTEM SCAN OPTIONS (COLOR) PREVIEW COMPRESSION: NORMAL Scan Options (Color) Screen – PDF/A file format COMPRESSION (PDF/A file format selected) - Use this selection to determine the compression method to apply to the saved PDF/A document. Select one of the following: •...
(Dark) Use this setting for documents with a dark background or with medium contrast between the foreground and background. In this mode, the background is not suppressed, but the foreground image is improved to increase the contrast. image quality parameters to obtain the best copy. XEROX WIDE FORMAT COPY SYSTEM...
You can use this feature to further adjust the effects of the Type and Background Suppression selections. The feature operates with all four Background Suppression modes. Image Quality • 49 XEROX WIDE FORMAT COPY SYSTEM...
READY position at the completion of the scan. When the DOCUMENT RETURN feature is set to REAR, the Scan System delivers the document to the rear Stacker at the completion of the scan. XEROX WIDE FORMAT COPY SYSTEM SCANNER CONTROL AUTOSCAN...
Page 66
Select the Menu key > CONFIGURATION>SCAN SYSTEM CONTROL, MODE: for additional information. 52 • Making copies • Thick documents • Documents longer than 5 feet (1.52 meters) • Documents over 36 inches (914 mm) in width XEROX WIDE FORMAT COPY SYSTEM...
Refer to the applicable sections of this guide for detailed information about the many document settings available to you. XEROX WIDE FORMAT COPY SYSTEM Image Quality Illustration Making copies • 53...
1. Insert the original document face down and centered on the Document Feed-in Tray of the Scan System. 2. Gently move the document forward until the lead edge engages the feed rolls. The Scan System transports the document to the XEROX WIDE FORMAT COPY SYSTEM...
NOTE: If the image needs to be rotated to fit on the selected media size, additional processing time is required. If possible, feed the original XEROX WIDE FORMAT COPY SYSTEM starting position. It then scans the document. The resulting image is electronically sent to the Printer and your copy is printed.
5. Press the Enter key to confirm your choice. 6. Set the Reduce/Enlarge to Auto. 7. Insert the document face down into the Scan System. If the scan does not start automatically, press the Start key. XEROX WIDE FORMAT COPY SYSTEM...
Scan System Document Feed Tray when scanning. For additional folding and title block positioning information, refer to the Folder Operator Manual or the Folding Supplement CD. XEROX WIDE FORMAT COPY SYSTEM Scanning when using a Folder • 57...
INSERT DOCUMENT AUTO 100.0 % Ready to Copy Screen NOTE: Any of the finishing options can be changed during a Sets Build job. The option(s) must be changed before the document to be copied is inserted. XEROX WIDE FORMAT COPY SYSTEM...
Document Handler, a message will be displayed to enter the scan width. To scan the document, enter 36 in. (914 mm) then press the Enter key to start the scan. A number larger than 36 (914) will not be accepted. XEROX WIDE FORMAT COPY SYSTEM Scanning oversized documents • 59...
If an improper key is pressed, a multiple beep sound will be heard. The illustration on the following page depicts the special features portion of the Scan System Control Panel. XEROX WIDE FORMAT COPY SYSTEM Special features keys • 61...
The default value is 1 minute. It can be set to a value between 1 and 99 minutes. Sample A B C D E F M N O J K L W X Y T U V C/CA Start XEROX WIDE FORMAT COPY SYSTEM...
IMAGE OVERWRITE IN PROGRESS ” message on the printer and scan system during the reboot. Scan System users will not be able to recall the last job. XEROX WIDE FORMAT COPY SYSTEM • LAST JOB - Enables you to recall and reuse the information from the last copy job.
Copier Parameters and Images Screen 4. Press the Enter key to return to the READY screen. You can now use the settings as they have been recalled, or you can change one or more of them. XEROX WIDE FORMAT COPY SYSTEM...
Deleting the Last Job Job Templates XEROX WIDE FORMAT COPY SYSTEM If the last job was a set, the settings that can be changed are displayed in a neutral state (the LEDs are off). Changing one of these settings will apply to all of the pages in the set.
Locations that contain a template already are not shown. SAVE TEMPLATE UNUSED TEMPLATES: 6 7 8 9 ENTER TEMPLA TE NUMBER: Save Template Screen 6. Choose an unused location and use the numeric keypad to enter its location. XEROX WIDE FORMAT COPY SYSTEM...
Page 81
Templates To recall a template: XEROX WIDE FORMAT COPY SYSTEM 7. Press the Enter key to confirm your location choice. The settings from the current copy job are saved at the location entered and a save confirmation screen is displayed.
3. Press the Enter key to select JOB TEMPLATES. The JOB TEMPLATES menu screen is displayed. 4. Press the Next key until DELETE TEMPLATE is highlighted. 5. Press the Enter key to select DELETE TEMPLATE. The DELETE TEMPLATE screen is displayed. This screen indicates XEROX WIDE FORMAT COPY SYSTEM...
Each additional job will then have these settings established as the default selections. To save the current job settings as the default template: XEROX WIDE FORMAT COPY SYSTEM the locations for the templates currently in use. Locations that do not contain a template are not shown.
Other Finisher options that are accessed from this screen, using the Next key, are: Punch Options, Margin Options, Crossfold Options, and Intelligent Title Block Option. NOTE: If no finishing device is connected, pressing the Finisher key produces the error message shown below. XEROX WIDE FORMAT COPY SYSTEM...
Page 85
Finisher menu. The title block location can be changed on this screen using the Next and Previous keys. XEROX WIDE FORMAT COPY SYSTEM FINISHE R FINISHE R OPTION IS NOT AVAILABLE...
The TAB OPTIONS feature enables you to override the pre-programmed tab settings for the selected finishing program. The choices are ALWAYS ON, ALWAYS OFF, and USE PROGRAM SETTING. USE PROGRAM SETTING is the factory default setting. XEROX WIDE FORMAT COPY SYSTEM...
CROSSFOLD OPTIONS programmed crossfold settings for the selected finishing program. The choices are ALWAYS ON, ALWAYS OFF, and USE PROGRAM SETTING. USE PROGRAM SETTING is the factory default setting. XEROX WIDE FORMAT COPY SYSTEM TAB OPTIONS TAB: USE PROGRAM Tab Options Screen...
The OUTPUT BIN feature enables you to specify which finisher output bin to use for the finished output. The choices are DON’T CARE, BIN X (where X equals 1 to the actual number of finisher bins), FANFOLD. XEROX WIDE FORMAT COPY SYSTEM...
“Main Menu” section of this manual for further information about the DOCUMENT RETURN parameter. To build a collated set: Building and printing the set XEROX WIDE FORMAT COPY SYSTEM OUTPUT BIN OUTPUT BIN: BYPASS Output Bin Screen 1. Press the Sets Build key. The Sets Build indicator lamp illuminates and the SETS BUILD screen is displayed.
Page 90
PRESS START TO P RINT Ready to Print Set Screen 7. If desired, you can now make further changes to the Media Selection , Source selection and the Reduction/Enlargement PRINTE D PRINTE D MEMORY 100.0 XEROX WIDE FORMAT COPY SYSTEM...
Eliminating the collection of this information increases overall copy speed. To enable Batch Mode processing: XEROX WIDE FORMAT COPY SYSTEM value. Any such change will be applied to that printing of the entire set.
NOTE: Margins can only be adjusted when the WIDE FORMAT COPY SYSTEM is in the COPY mode. The example below illustrates an image entering the Scan System and the orientation of the image margins. XEROX WIDE FORMAT COPY SYSTEM...
Page 93
NOTE: Each margin has two components. They are a “+/-“ indicator and a numeric value. As you press the Previous or Next key, the components highlight individually. XEROX WIDE FORMAT COPY SYSTEM Scanner Lead Trail Image Entering the Scan System Diagram •...
JUSTIFICATION screen is displayed. This screen shows the current settings for the X and Y coordinates. It also includes a graphical display of the approximate position of the image as a result of the settings. XEROX WIDE FORMAT COPY SYSTEM...
Creating a Mirror Image image. To create a mirror image: Below is an example of the TRANSFORM screen with both the MIRROR and INVERT options turned off. XEROX WIDE FORMAT COPY SYSTEM JUSTIF ICA TION LEFT CENTER Justification Screen 4. Press the Previous or the Next key to select the X (horizontal) or Y (vertical) coordinate.
Page 96
For grayscale images, the image will be converted into its photographic negative. INVERT is not selectable when Color is selected as an Original , Type . Transform XEROX WIDE FORMAT COPY SYSTEM...
Page 97
The example below shows the TRANSFORM screen with INVERT turned ON. NOTE: To cancel your choice, press the Exit key. XEROX WIDE FORMAT COPY SYSTEM 1. Press the Transform key. The TRANSFORM MENU screen is displayed. 2. Press the Next key until TRANSFORM is highlighted.
IMAGE TO FILE, and the Scan-to-Print feature key must be installed to get SCAN IMAGE TO PRINTER. It is convenient on the WIDE FORMAT COPY SYSTEMS to be able to make a sample before scanning an image to file. XEROX WIDE FORMAT COPY SYSTEM...
Page 99
IMAGE TO PRINTER selection field will not be shown. Instead, it will be replaced by the phrase "NO SCAN-TO-PRINT LICENSE". XEROX WIDE FORMAT COPY SYSTEM 1. If the Scan System is set to COPY mode, switch to SCAN mode. For more information, refer to the section of this document entitled “Switching between COPY mode and SCAN mode”.
Page 100
The processing time for Scan-to-Printer images will be longer, depending on the image size. 86 • Special features keys XEROX WIDE FORMAT COPY SYSTEM...
The WIDE FORMAT COPY SYSTEM has two scanning modes of operation: COPY mode and SCAN mode. NOTE: Color Scan-to-Net is an available option for all XEROX WIDE FORMAT COPY SYSTEMS equipped with the WIDE FORMAT SCAN SYSTEM. The Color Scan-to-Net feature requires a separately purchased, Color Enablement feature key.
User ID code, then enter a valid account number to obtain the READY screen. 2. Press the Mode key. The system switches to the SCAN mode and the screen now displays. Pressing the Mode key again returns the system to the COPY mode. XEROX WIDE FORMAT COPY SYSTEM...
Below is an example of the READY TO SCAN screen. Following the example are descriptions of the special information displayed on the screen. TIFF/CCITTG4 1 BIT XEROX WIDE FORMAT COPY SYSTEM PLEASE ENTER DIRECTORY Images Please Enter Directory Screen 3. Enter a Directory name, up to 16 alphanumeric characters, to which you will scan the images.
Original , Type. Use the Previous , Next , and Enter keys to enable PREVIEW. Use the Enter key to confirm your choice(s). For Normal and Line modes, you will be able to XEROX WIDE FORMAT COPY SYSTEM...
Page 105
NOTE: You may have to press the Start button if the configuration (for Auto Scan) has been changed from the factory default. XEROX WIDE FORMAT COPY SYSTEM select single bit preview image scaling, and with Accxes 12.5, the system produces improved preview images for both Normal and Line modes.
They are: • Listing the number of images stored under each directory and the percentage of total hard disk space consumed by each account • Deleting all of the images scanned under any directory. XEROX WIDE FORMAT COPY SYSTEM...
Page 107
Deleting all of the images currently stored on the hard disk. Refer to “File System” in the “Main Menu” section of this manual for complete information about the above functions. Scanning to the Network (SCAN mode) • 93 XEROX WIDE FORMAT COPY SYSTEM...
When you access the Main Menu, a menu containing the following sub- menus is displayed: To access the Main Menu : XEROX WIDE FORMAT COPY SYSTEM • CONFIGURATION - Enables you to configure the settings for a variety of system options. These include localization, the Scan...
1. Press the Menu key. The MAIN MENU screen is displayed. 2. Press the Enter key to select CONFIGURATION. The CONFIGURATION menu screen is displayed. The black arrows indicate the menu contains more options than are visible. The selected option is highlighted. XEROX WIDE FORMAT COPY SYSTEM...
The choices for LANGUAGE are ENGLISH, SPANISH, FRENCH, ITALIAN, GERMAN, RUSSIAN, or PORTUGUESE. ENGLISH is the default setting. The choices for DISPLAY UNITS are INCHES or MM (MILLIMETERS). INCHES is the default setting. XEROX WIDE FORMAT COPY SYSTEM CONFIGURATION LOCALIZATION CONTROL PANEL COPY OPTIONS Configuration Screen 3.
Scan-to-Net feature is enabled. Press the Enter key to select the highlighted setting. 8. Repeat steps 5 through 8 if you wish to change another setting. 9. Press the Exit key to return to the CONFIGURATION menu screen. XEROX WIDE FORMAT COPY SYSTEM...
The COPY OPTIONS feature of the CONFIGURATION menu provides a COPY OPTIONS sub-menu of the following choices: To access the COPY OPTIONS menu: XEROX WIDE FORMAT COPY SYSTEM • MEDIA SERIES – Sets the standard media sizes for preset output formats. Table 5 shows the standard media series and the sizes associated with them.
Page 114
5 for a listing of the sizes associated with each media series. To enable/disable a media series: 1. Press the Menu key. The MAIN MENU screen is displayed. 2. Press the Enter key to select CONFIGURATION. The CONFIGURATION menu screen is displayed. XEROX WIDE FORMAT COPY SYSTEM...
The first "0.0" in each "0.0 x 0.0" format represents the width. The second "0.0" represents the length. XEROX WIDE FORMAT COPY SYSTEM 3. Press the Next key until COPY OPTIONS is highlighted. 4. Press the Enter key to select COPY OPTIONS. The COPY OPTIONS menu screen is displayed.
Page 116
5. Press the Next key until CUSTOM R/E PRESETS is highlighted. 6. Press the Enter key to select CUSTOM R/E PRESETS. The CUSTOM R/E PRESETS screen is displayed. Below is an example of the CUSTOM R/E PRESETS screen. 0.0.X 0.0 0.0.X 0.0 0.0.X 0.0 XEROX WIDE FORMAT COPY SYSTEM...
Page 117
Menu key > Configuration > Copy Options > Imaging > Maximum Copy Length. The default is 100 feet. For the 6030/6050/6050A, the scanned copy would get cut off at 3 meters. WARNING: Copy documents that are larger than the printer’s maximum capability will not print correctly, or may not print at all.
4. Press the Enter key to select IMAGE ENHANCEMENT. The IMAGE ENHANCEMENT menu screen is displayed. 5. Press the Next key to highlight COLOR IQ. 6. Press the Enter key to select COLOR IQ. The COLOR IQ screen is displayed. IMAGING XEROX WIDE FORMAT COPY SYSTEM...
The TIMERS option of the CONFIGURATION menu allows you to set the TIMERS values for the time-out functions. Pressing any key or scanning a document resets the timers. The timers are as follows: XEROX WIDE FORMAT COPY SYSTEM IMAGE ENHANCEMENT IMAGE ENHANCEMENT COLOR IQ SRGB...
Page 120
8. Press the Enter key to confirm the value. 9. Repeat steps 5 through 8 if you want to set the value for additional timers. 10. Press the Exit key to return to the CONFIGURATION menu screen. TIMERS XEROX WIDE FORMAT COPY SYSTEM...
It contains the following features: NOTE: Refer to Controlling the Scan for additional information. XEROX WIDE FORMAT COPY SYSTEM 1. Press the Menu key. The MAIN MENU screen is displayed. 2. Press the Enter key to select CONFIGURATION. The CONFIGURATION menu screen is displayed.
Page 122
Enter key to confirm the choice. The options are MANUAL, AUTOWIDTH, AUTOWIDTH/AUTOCENTER, or PRODUCTIVITY. If PRODUCTIVITY is selected, then use the Previous or Next key to select the ANSI, ARCH, ISO A, ISO B, JISB, or CUSTOM setting. FRONT XEROX WIDE FORMAT COPY SYSTEM...
The SYSTEM INFORMATION option of the MAIN MENU contains the following menu choices: To access the SYSTEM INFORMATION menu: XEROX WIDE FORMAT COPY SYSTEM • Use the CUSTOM setting when documents of mixed series will be scanned in the same job. The CUSTOM selection uses the custom sizes that are entered in the CUSTOM MEDIA SIZES (Menu key >...
6. Press the Enter key to select the highlighted component. The screen for the selected component is displayed. Following are examples of the screens for each of the components. SCANNER MODEL: XEROX WIDE FORMAT SCAN SYSTEM FIRMWARE: 3.2.8 Scanner Screen CONTROLLER MODEL: 4 FIRMWARE: 10.0...
Controller. Each fault message contains a fault code and a digital time stamp. When you call for service, the service center may ask you for this information. To display the recent fault list: XEROX WIDE FORMAT COPY SYSTEM CONTROL PANEL MODEL: 1 FIRMWARE : 1.1.0...
4. Press the Previous or Next key until CONFIGURATION PRINTS is highlighted. 5. Press the Enter key to select CONFIGURATION PRINTS. The CONFIGURATION PRINTS screen is displayed. CONFIGURATION COPIER CONFIGURATION PRINTER CONFIGURATION PRINTER SETTINGS ALL CONFIGURATION PRINTS Configuration Screen XEROX WIDE FORMAT COPY SYSTEM...
Below is an illustration of the COPIER CONFIGURATION screen. Below are illustrations of the other CONFIGURATION PRINT screens with the status message. XEROX WIDE FORMAT COPY SYSTEM 6. Press the Previous or Next key to highlight the configuration page you want to print.
2. Press the Previous or Next key until SYSTEM ADMINISTRATION is highlighted. 3. Press the Enter key to select SYSTEM ADMINISTRATION. The SYSTEM ADMINISTRATION password screen is displayed. SYS TEM ADMINIS TRA TION ENTE R PASSWORD: System Administration Screen XEROX WIDE FORMAT COPY SYSTEM...
FILE SYSTEM provides a sub-menu of the following menu choices: To access the FILE SYSTEM menu: XEROX WIDE FORMAT COPY SYSTEM 4. Use the numeric keypad to enter the password. The password will display as asterisks. 5. Press the Enter key to confirm the password entry. The SYSTEM ADMINISTRATION menu screen is displayed.
Also, if the directory name exceeds the character limit of the first line, the name will be truncated at the width of the screen. Use the Previous or Next key to scroll through the list. SIZE (%) COUNT <1 XEROX WIDE FORMAT COPY SYSTEM...
Page 131
DELETING STORED IMAGES BY DIRECTORY XEROX WIDE FORMAT COPY SYSTEM An asterisk in the COUNT field indicates that some images in memory have not yet been processed. A “<1” in the SIZE field indicates the account uses less than 1% of the total disk space on the file system.
Page 132
IMAGES DELETED. DELETE IMAGES ARE YOU SURE?: IMAGES DELETED Delete Images – Are You Sure Screen 8. Press the Exit key to return to the FILE SYSTEM menu screen. XEROX WIDE FORMAT COPY SYSTEM...
CHANGE PASSWORD XEROX WIDE FORMAT COPY SYSTEM The CHANGE PASSWORD option of the SYSTEM ADMINISTRATION menu allows the system administrator to change the system administration password. The default system administration password on all newly delivered machines is 0 (zero). The system administrator is required to change the password after the initial log in.
1. Select the Menu key. 2. Access the SYSTEM ADMINISTRATION menu. 3. Press the Next key until SECURITY SETTINGS is highlighted. 4. Press the Enter key to select SECURITY SETTINGS. The SECURITY SETTINGS screen is displayed. XEROX WIDE FORMAT COPY SYSTEM...
NOTE: Some of the scanner diagnostics listed below require a password to access and are performed only by a Customer Service Engineer. To access the DIAGNOSTICS menu: XEROX WIDE FORMAT COPY SYSTEM SECURITY SE TTINGS IMAGE RECALL: ENABLED Security Settings Screen 5.
Below is an example of the USAGE METERS screen. In the example, the units are displayed as meters. USAGE METE RS SCANNER (F MEDIA LINEAR MEDIA AREA Usage Meters Screen XEROX WIDE FORMAT COPY SYSTEM...
SCANNER provides a sub-menu of the following choices: DIAGNOSTICS To access the SCANNER DIAGNOSTICS menu: XEROX WIDE FORMAT COPY SYSTEM 5. When finished viewing the usage information, press the Exit key to return to the DIAGNOSTICS menu screen. • IMAGE PATH - Enables you to validate the operation of the image processing (IP) card and the image bar.
A test result with no failure displays as PASS. A test result with a failure displays a failure code. If a failure code is displayed, call for service. STATUS: 0 BAR2: 0 ALL: 0 XEROX WIDE FORMAT COPY SYSTEM...
Page 139
FULL SYSTEM TEST Scan System to determine if it is working properly. To run the FULL SYSTEM TEST diagnostic: XEROX WIDE FORMAT COPY SYSTEM 7. Press the Exit key to return to the SCANNER DIAGNOSTICS menu screen. 1. Press the Menu key. The MAIN MENU screen is displayed.
Page 140
Select the SCANNER RELIABILITY METER option to view the current value of the usage meter maintained by the Scan System. The meter counts and displays the number of linear feet since the Scan System XEROX WIDE FORMAT COPY SYSTEM...
Page 141
Scanner Fault Log. (ORDERED) To run the SCANNER FAULTS (ORDERED) diagnostic: XEROX WIDE FORMAT COPY SYSTEM 1. Press the Menu key. The MAIN MENU screen is displayed. 2. Press the Next key until DIAGNOSTICS is highlighted. 3. Press the Enter key to select DIAGNOSTICS. The DIAGNOSTICS menu screen is displayed.
Page 142
The first line of the display contains the value of the internal Scanner Reliability Meter reading when the log was last cleared. If the log has never been cleared, the value is set to zero. This line scrolls with the log data. 2001 2476 2402 XEROX WIDE FORMAT COPY SYSTEM...
Calibration Motor to the cleaning position. There are two selections CLEANING POSITION AND HOME POSITION. The COMPONENT TESTS option of the SCANNER DIAGNOSTICS COMPONENT TESTS menu provides a sub-menu of the following menu choices: XEROX WIDE FORMAT COPY SYSTEM SCANNER FAULTS (COUNTS) LAST CLEARED: 2001 01-02...
The MOTOR SPEED option is for use by the Customer Service Engineer only and requires the entry of the diagnostic password. It allows the Customer Service Engineer to adjust the Scan System motor speed and correct magnification error in the process direction. XEROX WIDE FORMAT COPY SYSTEM...
Page 145
System optical paper sensors, calibration home sensor, and the thick document sensor. To display the status of the sensors: XEROX WIDE FORMAT COPY SYSTEM 1. Press the Menu key. The MAIN MENU screen is displayed. 2. Press the Next key until DIAGNOSTICS is highlighted.
Page 146
INPUT, REGISTER, and EXIT sensors. The sensors are located underneath the top cover. The photo below shows the location of each of the sensors on the Document Feed Tray. Sensor Locations on the Synergix Scan System HOME: REGISTER: XEROX WIDE FORMAT COPY SYSTEM...
Page 147
A : Calibration Roll Drive Gear XEROX WIDE FORMAT COPY SYSTEM A : Left Oversize Document Sensor B : Exit C : Right Oversize Document Sensor c) Observe the Display. When the sensor is activated the icon O is filled in.
Page 148
Press the Enter key to confirm your selection. 11. Select the motor speed. a) Press the Previous or Next key to highlight SPEED. b) Press the Enter key to confirm your selection. SPEED: .125 FORWARD XEROX WIDE FORMAT COPY SYSTEM...
Page 149
CALIBRATION motor. MOTOR To run the CALIBRATION MOTOR diagnostic: XEROX WIDE FORMAT COPY SYSTEM c) Press the Previous or Next key to select the desired motor speed. The choices are .125, .250, .500, .750, 1, 1.5, 2, 3 and 4.
Page 150
PRESS START TO BEGIN Read NVR Screen 8. Press the Start key to display the actual values. 9. Press the Previous or Next key to scroll through the values. There are 16 rows of values in all. XEROX WIDE FORMAT COPY SYSTEM...
Customer Service Engineer only. It allows the Customer Service Engineer to enter the password for access to password-protected diagnostic functions. XEROX WIDE FORMAT COPY SYSTEM 10. Press the Exit key to return to the SCANNER DIAGNOSTICS screen. Main Menu • 137...
Series, 6204, and 721P, Job Accounting for the Printer can be set from either the Printer Control Panel or the Web-based Print Management Tool. For the WIDE FORMAT COPY SYSTEM 6030/6050/6050A, Job Accounting for the Printer can be set from the Web Print Management Tool only.
Job Accounting is enabled or disabled on the Scan System and the Printer independently. Job submission from either device depends on the Job Accounting mode set for the device. If Job Accounting is ENABLED, the following screen is displayed: DISABLED XEROX WIDE FORMAT COPY SYSTEM...
Page 155
For both the ENABLED and OPTIONAL modes, if you enter an invalid account, an error message indicated below is displayed. You cannot access the READY screen if an invalid number is entered XEROX WIDE FORMAT COPY SYSTEM PLEASE ENTER USER:...
NOTE: To avoid incorrect accounting, always ensure that the PLEASE ENTER USER screen is displayed before leaving the WIDE FORMAT COPY SYSTEM for the next operator. Press the Exit key to obtain this screen. XEROX WIDE FORMAT COPY SYSTEM...
Clean the Calibration Strip. See the "Cleaning the Calibration Strip" section. • Inspect the Platen Glass for chips and scratches. If the Platen Glass is chipped or scratched, and these defects are visible in the scanned images, call XEROX service. Cleaning and maintenance - Scan System • 143...
NOTE: The Backer Roll is located on the underside of the Top Cover. The Backer Roll may rotate as you clean it. This is normal behavior. 7. Close the Top Cover. D : Document Drive Rolls (front) E : Document Feed Tray XEROX WIDE FORMAT COPY SYSTEM...
Press the Enter key to select CLEANING POSITION. 2. Raise the Top Cover. 3. Inspect the Calibration Strip. 4. Place a small amount of platen glass cleaning fluid (Xerox 43P81) on a clean, lint-free towel (600S4372) and clean the Calibration Strip.
Controller. Check that the cable was not forced in the connector incorrectly. XEROX WIDE FORMAT COPY SYSTEM Table 7. Problem Solving Table Second solution to try Check that the Power On/Off Switch is in the on (I) position.
Page 162
Third solution to Run the diagnostic test to validate which width detection sensors are working correctly. Select Main button > Diagnostics > Scanner Diagnostics > Component Tests > Sensors. XEROX WIDE FORMAT COPY SYSTEM...
Page 163
Image quality Vertical lines and streaks are Clean the Platen Glass. visible in the copy. XEROX WIDE FORMAT COPY SYSTEM Second solution to try Third solution to If the thin document has a Insert the document...
Page 164
Remove the document. Press Start to print the job. Remove the document. Wait for previous scans to finish printing. End the current set or print it if a set is in progress. Rescan the document. XEROX WIDE FORMAT COPY SYSTEM...
Page 165
Management Tool, the FreeFlow IN PROGRESS” Accxes controller will reboot, causing the message on the printer and scan system during the reboot. XEROX WIDE FORMAT COPY SYSTEM Power off the System. Check that all cables are connected correctly. Power on the System.
Page 166
AC power and is still switched on. Power off and power on the System. See the "Powering off the System" and "Powering on the System" sections for more information. Update the Scan System firmware. XEROX WIDE FORMAT COPY SYSTEM...
Page 167
VERIFY SCAN SYSTEM IS POWERED AND PROPERLY CONNECTED SCAN SYSTEM FAULT - An error occurred during processing XEROX WIDE FORMAT COPY SYSTEM Corrective action Contact your System Administrator. Contact your System Administrator. Remove the document. Press Start to print the job.
Page 168
Check that the Scan System is still connected to the AC power and is still switched on. Power off and power on the System. See the "Powering off the System" and "Powering on the System" sections for more information. XEROX WIDE FORMAT COPY SYSTEM...
Page 169
Scan System. SYSTEM VERIFY SCAN SYSTEM IS POWERED AND PROPERLY CONNECTED that the document contains. XEROX WIDE FORMAT COPY SYSTEM Corrective action Contact your System Administrator. Contact your System Administrator. Remove the document. Press Start to print the job.
Page 170
AC power and is still switched on. Power off and power on the System. See the "Powering off the System" and "Powering on the System" sections for more information. Recreate the image and try again. XEROX WIDE FORMAT COPY SYSTEM...
Page 171
SYSTEM VERIFY SCAN SYSTEM IS POWERED AND PROPERLY CONNECTED corrupted or does not conform to the XEROX WIDE FORMAT COPY SYSTEM Corrective action Contact your System Administrator. Contact your System Administrator. Remove the document. Press Start to print the job.
Page 172
Check that the Scan System is still connected to the AC power and is still switched on. Power off and power on the System. See the "Powering off the System" and "Powering on the System" sections for more information. XEROX WIDE FORMAT COPY SYSTEM...
Page 173
SYSTEM VERIFY SCAN SYSTEM IS POWERED AND PROPERLY CONNECTED LL codes appear Intermittent Scan System and/or XEROX WIDE FORMAT COPY SYSTEM Corrective action Contact your System Administrator. Contact your System Administrator. Remove the document. Press Start to print the job.
Page 174
AC power and is still switched on. Power off and power on the System. See the "Powering off the System" and "Powering on the System" sections for more information. problem persists, call for service. XEROX WIDE FORMAT COPY SYSTEM...
Page 175
Scan System. SYSTEM VERIFY SCAN SYSTEM IS POWERED AND PROPERLY CONNECTED documents are scanned XEROX WIDE FORMAT COPY SYSTEM Corrective action Contact your System Administrator. Contact your System Administrator. Remove the document. Press Start to print the job.
Page 176
162 • Problem solving XEROX WIDE FORMAT COPY SYSTEM...
* Requires Turbo III Speed Enhancement feature key, PUN, YKE, YKE- N, or FRX Controller running version 9.0 or higher software, WIDE FORMAT SCAN SYSTEM firmware version 3.0.7A or higher. XEROX WIDE FORMAT COPY SYSTEM 721P Series standard standard...
Page 178
130 W Running: 200 W Electrical Requirements Voltage (AC): 100 - 120 VAC 200 - 240 VAC Current: 4 amps 3 amps 50/60 Hz Frequency Audible Noise Standby: 33.7 dBA Running: 52.1 dBA Impulse: 56.4 dBA XEROX WIDE FORMAT COPY SYSTEM...
Photo (scan mode) 8 bit Photo (scan mode) 8 bit Photo (copy or scan 8 bit mode) Photo (scan mode) 8 bit XEROX WIDE FORMAT COPY SYSTEM Turbo II Turbo III IPS/ cm/s IPS/ cm/s IPS/ cm/s 4.00/10.16 4.00/10.16 7.00/17.78 4.00/10.16 4.00/10.16 4.00/10.16...
JIS B4 166 • Appendices Appendix 2: Paper Sheet Sizes Paper sizes supported by the 510 Series, 721P, 6030/6050/6050A, and 6204 Printers and the Controller with Firmware 9.1 or higher are shown in Table 10. The Media types supported by your printer and the FreeFlow Accxes firmware can be checked on the Web Print Management Tool by selecting Defaults >...
Page 181
JIS B3 JIS B2 JIS B1 XEROX WIDE FORMAT COPY SYSTEM 364mm 515mm 728mm Appendices • 167...
Sp. A1 Sp. A0 168 • Appendices Appendix 3: Paper Roll Sizes Table 11 below shows roll sizes supported by the 510 Series, 721P, 6030/6050/6050A, and 6204 Printers. Table 11. Printer roll sizes Width 510dp Series 841 mm 594 mm...
OFF, and LED 1 will be switched ON. If POST did not successfully complete, all 4 LEDs will be switched OFF (i.e., they will be unlit). XEROX WIDE FORMAT COPY SYSTEM Table 12. Controller LED status indicators LED Number...
Dynamic Background Removal Custom R/E Preset Imaging Auto-Rotate Reduction Line Preservation Diagnostics Scanner Timers Power Control Saver Feature Autoscan Power Saver Printer Interrupt Document Return delay File Deletion Mode: Autowidth/Auto Center Manual Width Autowidth Productivity XEROX WIDE FORMAT COPY SYSTEM...
Page 185
The menu tree below shows the Diagnostics option structure of the Main Menu. Clear Scanner Usage Meters Scanner (Ft Scanner (Ft Media Linear Media Area XEROX WIDE FORMAT COPY SYSTEM System Information Recent Fault List Control Panel Printer System Administration Password Change Password...
Page 187
XEROX WIDE FORMAT COPY SYSTEM Configuration Screen, 97, 112 CONTROL PANEL, 96 CONTROL PANEL option, 98 Control Panel Screen, 98 CONTROLLER FAULT, 150 Controller Power Switches, 26 Controller Screen, 110 Copier Configuration Screen, Copier Parameters and Images Screen, 64 copies, making, 51...
Page 188
OUTPUT BIN option, 74 Output Bin Screen, 75 Output Format option, 11 OVERLENGTH OPTIONS, 72 Overlength Options Screen, 72 oversized documents, 59 PACKBITS, 44, 45 PALETTE, 46 paper sizes , 166 password, 114 PASSWORD, 121 XEROX WIDE FORMAT COPY SYSTEM...
Page 189
XEROX WIDE FORMAT COPY SYSTEM PASSWORD option, 137 PERCEPTUAL, 46 Photo , 15, 43 Photo mode, 40 Please Enter Account Id Screen, 141 Please Enter Directory Screen, Please Enter User Id Screen, Power Cord, 6 Power off the Controller and the...
Page 190
TRANSFORM, 78 Transform key, 78 TRANSFORM MENU, 78 Transform Menu Screen, 78 TRANSFORM option, 81 Transform Screen, 82, 83 translucent media, 37 Type Line, 42 Type option, 10, 14, 40 Type Photo, 43 Type, Color, 45 XEROX WIDE FORMAT COPY SYSTEM...
Page 191
XEROX WIDE FORMAT COPY SYSTEM Type, Normal, 42 Understanding the READY TO SCAN screen, 89 USAGE METERS, 121, 122 Usage Meters Screen, 122 WEB, 46 WIDE DOCUMENTS, 59 WIDE FORMAT SCAN SYSTEM Front View, 4 WIDE FORMAT SCAN SYSTEM Rear View, 5 Width Found for Set is XX.X...
Page 192
This page intentionally left blank. 178 • Index XEROX WIDE FORMAT COPY SYSTEM...