Xerox 721 Message Manual page 201

XEROX 4635 LASER PRINTING SYSTEMS MESSAGE GUIDE
9.
These messages may appear during the HARDCOPY process
(printing copy of graphic .IMG files with comprehensive
descriptor page). Refer to your 4635 LPS Operations Reference
for information about the HARDCOPY command.
PR1000 All files hardcopied, hardcopy exiting.
The HARDCOPY command was entered. File(s) have printed and
the process is terminated.
Action None.
PR1050 Hardcopy continuing after disk saturation.
The hardcopy process has resumed normal speed because the
print file is no longer saturated.
Action None.
PR1070 Hardcopy exiting to print at disk saturation.
File(s) specified in the HARDCOPY command caused print file to
become full. The hardcopy process is slowed to allow data to
print and create more space on the system disk.
Action None.
PR1080 Hardcopy exiting to print.
The HARDCOPY command was entered. The system has
completed the requested task internally and is starting to print
the file.
Action None.
PR1800 Hardcopy aborting.
The ABORT command was entered. The hardcopy task has been
terminated.
Action None.
PR2600 Not enough space on disk to hardcopy.
The selected file cannot be hardcopied because the print file is
not large enough to hold it.
Action 1. Use the REALLOCATE command to enlarge the print file.
(Refer to your 4635 LPS Operations Reference chapter on
setting LPS parameters for additional information.)
2. Reenter the HARDCOPY command.
PR (HARDCOPY graphics
printing command) messages
9-1