Xerox 721 Message Manual page 80

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-4
OS0610 Page spacing forward
The SPACE n PAGES command was entered. The system is
skipping forward over a specified number of pages in the current
job.
Action None.
OS0620 Page spacing backward
The SPACE -n PAGES command was entered. The system is
skipping backward over a specified number of pages in the
current job.
Action None.
OS0630 Page spacing complete.
Total pages spaced: xx
Simplex data pages: xx.
Simplex nondata pages: xx
Duplex data pages: xx.
Duplex nondata pages: xx
Confirms that a SPACE n PAGES command has completed.
Action None.
OS0700 Cluster xx now deleted
A command was entered that caused both the current and the
preferred lists of feeder trays for the cluster to be empty. The
cluster has been deleted from the internal database.
Action None.
OS0720 Paper tray not found in any cluster
CLUSTER n or CLP n was entered, but the specified feeder tray
was not found in any cluster.
Action Check the cluster and assign a valid feeder tray. (Refer to your
4635 LPS Operations Reference chapter on setting up print jobs
for additional information.)
OS0730 Finishing exerciser utility: Successful Exit.
FEX has successfully completed.
Action None.
OS0731 Updating the IOT'S memory with test profile info
FEX is loading into the printer's non-volatile memory the new
finishing parameters profile you have specified.
Action None.
OS0732 Finishing exerciser is starting requested print job
FEX has created the test job and is starting to run it.
Action None.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE