Xerox 721 Message Manual page 31

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
HP2030 "ALL" not allowed at current logon level
HIP ONLINE ALL was entered, but the current LOGON level does
not support HIP ONLINE ALL.
Action None.
HP2090 Host interface must be online. Enter HIP 'ONLINE'
or
Host interface must be online. select or enter 'HIP ONLINE'
Host interface is not online.
Action Enter or select the HIP ONLINE command.
HP2100 Host file buffer full - enter HIP START
or
Host file buffer full - select or enter HIP START
The HIP STOP command was entered while the system was
online. Input continued transmitting files until the HIP buffer was
full. Host transmission has now stopped.
Action Enter or select the HIP START command to print files in the HIP
buffer.
HP2110 All jobs will be lost: confirm with 'Y'.
The HIP ABORT ALL command was entered. This message is a
confirmation prompt.
Action Enter Y to abort all jobs being processed.
or
If you do not wish to abort all jobs, enter N.
HP2120 Insufficient disk space for host buffering
Fewer than 256 blocks are available for HIP buffer space. There
is not sufficient space to receive and buffer files. The system
cannot go online.
Action 1. Delete files from system disk to provide more space.
2. Compress the system disk. (Refer to your 4635 LPS
Operations Reference chapter on managing LPS resources for
additional information.)
3. Enter the SETUP mode to change the HIP buffer file size.
(Refer to your 4635 LPS Operations Reference chapter on
HIP-accessed communicating modes for additional
information.)
HP2121 Insufficient disk space for log print file
You have entered HIP SHOW LOG [PRN]. There is insufficient
disk space for the printing of the log file.
Action Clear additional disk space for printing.
HIP (HOST INTERFACE PROCESSOR) MESSAGES
4-9