Xerox 721 Message Manual page 106

Laser printing system
Hide thumbs Also See for 721:
Table of Contents

Advertisement

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-30
OS1560
Tape rewind complete
The system has finished rewinding the tape.
Action
None.
OS1561
Font mapping does not exist for file-name.FNT.
There is no font mapping to run the job. Job processing will
continue using the font specified in the PDE.
Action
If you wish to override the PDE font, reenter the command using
valid font mapping.
OS1562
Font file not found for file-name.FNT.
You have specified a font file that does not exist in the system.
Job processing will continue using the font specified in the PDE
statement.
Action
If you wish to override the PDE font, verify the font file and
reenter the command.
OS1563
SEF file not found
You have specified that the font mappings you wish to use in the
job are contained in a file that does not exist in the system. Job
processing will continue using the font specified in the PDE
statement.
Action
If you wish to override the PDE font, verify the mapping file and
reenter the command.
OS1570
File protected--unable to dump
The system cannot print dump because the file is protected by
the SECURE filename.filetype command.
Action
1. Obtain the correct password and log on at Level 5. (Refer to
your 4635 LPS Operations Reference chapter on setting LPS
parameters for additional information.)
2. Retry printout.
OS1580
Can't print Ethernet error page - missing font
An Ethernet-transmitted job contains errors. The error page will
not print because the required font was not found on the system
disk.
Action
1. Load the necessary font file to disk. (Refer to your 4635 LPS
Operations Reference chapter on HIP-accessed
communicating modes for additional information.) Contact
your systems specialist or Xerox Customer Support for
information on the correct font to load.
2. Restart the job.
OS1585
Can't read message file. No Ethernet error page printed
The system cannot print the error page at the end of the
Ethernet-transmitted report because the required message file is
missing.
Action
Contact your systems specialist or Xerox Customer Service.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE

Advertisement

Table of Contents
loading

This manual is also suitable for:

4635

Table of Contents