Xerox 721 Message Manual page 244

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
15. 4635 LPS additional messages
These messages may appear on your 4635 LPS PC User Interface
(PC UI).
How the messages are organized
Messages that appear on your screen with numbers in front of
them are listed in the first part of this chapter in numerical order.
Messages that are not displayed with identifying numbers are
listed in the second part of this chapter alphabetically by the first
letter of the message text.
Operating system messages (OSxxxx)
Operating system messages (OSxxxx) are listed in chapter 6 of
this guide.
! fault and * hint messages
4635 LPS messages beginning with an exclamation point (!) or an
asterisk (*) identify printer hardware or software problem areas.
They also identify any printer devices that are not available for
use in a print job. For example, the message may indicate that a
bin or tray is jammed and unavailable. For information on
clearing these faults and hints, refer to instructions on the printer
control console display.
Selecting CLEAR
If a fault or hint message instructs you to select CLEAR, you can
either select the Clear Faults button on the PC UI screen, enter
CLE in the command line message window, or touch the Clear
soft button on the printer display.
General action to take
As a general rule, when an error message is displayed in a
message window on your 4635 PC User Interface, the
recommended actions are as follows:
• Follow any specific instructions the message gives you.
• If available, select the message window/command line's OK
header button to try to clear the message.
• If the message still displays and you are unable to print, your
LPS may have a serious software or hardware problem. You
should call Xerox Customer Service.
15-1