Xerox 721 Message Manual page 193

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
7.
These messages may appear while a Job Source Library is being
compiled using Print Description Language (PDL). PDL messages
are assigned to levels 0-9, depending on the severity of the
condition being reported. These levels are indicated by the first
number appearing after the "PD" in the code.
The levels are as follows:
Level 0—confirmation
Level 1—information
Level 2—routine maintenance or actions
Level 4—system or tape problems
Level 7—system problems
Level 8—probable severe software errors
Level 9—probable severe hardware errors
Note: For instructions on compiling JSLs and list of PDL
commands, refer to your 4635 LPS PDL/DJDE Reference.
PD0100 Noreplace specified.
A JDL object file that already exists was recompiled with
NOREPLACE option. The new file will not replace the already
existing one.
Action None.
PD0150 Replace specified.
A JDL object file that already exists was compiled again with the
REPLACE option. The new file will replace the already existing
one.
Action None.
PD0200 JDL replaced.
A JDL file has been replaced by a new file with the same name.
Action None.
PD0250 Replace denied by operator.
The operator has specified NOREPLACE in the PDL invocation
line. No action is needed.
Action None.
PDL (job source library
compilation) messages
7-1