Xerox 721 Message Manual page 155

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
OS6191 Graphic xxxxxx off page and will not be printed.
The graphic specified in JDE/DJDE exceeds page boundaries. The
graphic will not print.
Action Recode DJDE/JDE to scale down or reposition the graphic. (Refer
to your 4635 LPS Operations Reference chapter on using
graphics for additional information.)
OS6192 Too many graphics for page.
More than 16 graphics have been invoked for the page. The job
will abort.
Action Recreate the job, reducing the number of graphics on the page.
(Refer to your 4635 LPS Operations Reference chapter on using
graphics for additional information.)
OS6193 Graphic data for page exceeds graphic memory.
Not enough graphics memory remains for data on the page
being processed. Depending on JSL coding, one of the
following will occur:
a. The job will continue printing, omitting the graphic.
b. The job will abort.
c. An instruction to enter the CONTINUE or ABORT command
will appear on the system controller display. (Refer to
explanation for messages OS6713 - OS6719.)
Action 1. Recreate the job, reducing the amount of graphic data.
or
Purchase additional memory capacity.
2. Rerun the job.
OS6194 Invalid header in graphic xxxxxx.
The system is unable to access the indicated graphic file because
the file header is nonexistent or incorrectly formatted. The job
will abort.
Action 1. Reload the desired file onto disk. (Refer to your 4635 LPS
Operations Reference chapter on using graphics for
additional information.)
2. Restart the job.
OS6195 Page interleaved graphic xxxxxx read but not referenced.
A graphic interleaved with text is being input but is not
referenced by a DJDE. The graphic will not be printed.
Action 1. Recode DJDE, referencing the indicated graphic. (Refer to
your 4635 LPS PDL/DJDE Reference.)
2. Restart the job.
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-79