Xerox 721 Message Manual page 233

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
No resources; insufficient dynamic memory.
Virtual memory space was exhausted during Interpress master
processing and the job was aborted.
Operator requested job abort.
The ABORT I command terminated document processing at the
end of the current page.
Page too complicated; too many fonts+forms+operators
text+graphics.
The page is too complicated to print.
Parse failure; stack underflow.
During interpretation of an Interpress master, an attempt to
move an operand off the Interpress stack failed because the stack
was empty.
Requested memory length exceeds maximum size limit.
The Interpress decomposer has a maximum operand size of
16,000 bytes and its limit was exceeded.
Second system rollover.
A second rollover has occurred. The document cannot be
processed.
Too many errors in document.
Too many errors were found in the document to continue
processing.
Action 1. Correct the previous errors reported on the summary sheet.
2. Resend the document.
Too many "Unexpected RIP errors" encountered.
The integrity of the Raster Image Processor (RIP) board is suspect
due to the number of unexpected errors; therefore, RIP will no
longer be used.
Action 1. Download the RIP software via the PSC RIP command.
2. Resend the document.
3. If the problem continues, contact your systems specialist or
Xerox Customer Service.
SUMMARY SHEET ERROR MESSAGES
14-9