Xerox 721 Message Manual page 168

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-92
OS6820 Improper palette-name specification
The palette-name you have specified contains nonalphanumeric
characters and/or more than 32 characters.
Action Check the palette-name and retry the command.
OS6821 Improper color-name specification.
The ink-name you have specified contains either incorrect
characters or more than 32 characters.
Action Check the ink-name(s) you have specified and retry the
command.
OS6822 Improper catalog-name specification.
The catalog-name you have specified contains either incorrect
characters or more than 6 characters.
Action Check the catalog-name and retry the command.
OS6823 Black-format FILENAME.FRM references color-format logo(s).
The 4850 LPS detects that the form being printed in black-only
format references a logo in color format.
Action Convert the form to color format using the File Conversion
Utility (FCU). (Refer to your 4850 LPS Operations Reference
chapter on highlight color on the LPS.)
or
Use the FSL command LOGO to include the INK option, which
allows you to specify the desired ink for the logo. A two-color
logo can be obtained from the Xerox Font Center for this
purpose. (Refer to your Xerox LPS Forms Creation Guide.)
OS6824 Color-format FILENAME.FRM references black-format logo(s).
The system detects that a form in color format that references a
logo in black-only format is being printed.
Action Obtain a two-color format logo from the Xerox Font Center and
then reference this logo in your job.
OS6850 Improper host type for XCS file.
No host type was specified for "Volume Host =" statement in
JDL. Job will abort.
Action 1. Recode JDL with correct host type. (Refer to your 4635 LPS
PDL/DJDE Reference.)
2. Resend the job.
OS6851 Inconsistency between JDL and Start Command.
The specified JDL references unsupported options or is corrupt.
Action Contact your systems specialist or Xerox Customer Support.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE