Xerox 721 Message Manual page 196

PDL (JOB SOURCE LIBRARY COMPILATION) MESSAGES
PD8200 and PD8210
7-4
PD7200 PDL internal table overflow.
Not enough dynamic memory remains for JSL. JSL is too large
with too many tables.
Action Take out some of the tables and compile them separately. (Refer
to your 4635 LPS PDL/DJDE Reference.)
PD7400 Insufficient available disk space.
Insufficient system disk space remains for the PDL file.
Action 1. Enter the COMPRESS command.
2. If the problem continues, delete any unnecessary files.
3. If the problem still continues, enter the COMPRESS
command again. (Refer to your 4635 LPS Operations
Reference, chapter 3, "Managing LPS resources," table of
contents at the beginning of the chapter to locate additional
information.)
PD7500 Print file full.
Output listing work file exceeds space allocation.
Action Reduce the size of JSL.
PD7550 UNEXPECTED FILE OVERFLOW ENCOUNTERED DURING I/O
A large enough file was not created to allow complete transfer
from disk during input or output.
Action 1. Retry compiling JSL. (Refer to your 4635 LPS PDL/DJDE
Reference.)
2. If the problem continues, contact your systems specialist or
Xerox Customer Service.
PD7600 RTEXT File overflow.
Routing Text file has too many entries for the allotted system
disk space.
Action Reduce the number of entries.
Internal error in PDL.
An unspecified software error has occurred. JDL will not
compile.
Action 1. Retry compiling JDL.
2. If the problem continues, contact your systems specialist or
Xerox Customer Service.
PD8550 I/O error, processing SEF mapping file.
An I/O error occurred while processing the Short Edge Feed font
mapping file.
Action Recompile the JSL that generated the requested mapping file and
retry the operation.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE