Xerox 721 Message Manual page 275

4635 LPS ADDITIONAL MESSAGES
15-32
Failure to open AUD File Mgr In-Process log file.
The auditor is unable to open the in-process audit log. Audit
logging will not take place.
Action If the problem persists, call Xerox Customer Service.
Failure to register DDL class window for auditor.
This could occur during PC UI session startup. Windows has
failed to allow the auditor feature to register
Action If the problem persists, call Xerox Customer Service.
Failure to stop AUD file Mgr.
This may occur when the Exit To DOS option is selected from
the System Control or Utilities Menu. The File Manager used for
auditing has failed to properly terminate.
Action If the problem persists, call Xerox Customer Service.
FCG Exiting: Duplicate Profile Entries
When searching the FCG.LIB file for the specified profile label,
FCG will return the following message if 2 profile labels are
identical in name to the specified profile label.
FCG Exiting: FCG.LIB not present on system.
The profile library you have entered cannot be found.
FCG Exiting: Finishing Device %0 not found
You have requested a profile label that does not exist in the
FCG.LIB file.
FCG Exiting: Finishing Device <profile-name> not found
The personality profilename you have requested is not contained
in the specified FCG.LIB. This message is followed by message
OS1976 Profile not loaded.
FCG Exiting: Invalid command
You have requested a command that does not exist in the FCG's
task capabilities.
FCG Exiting: Invalid Profile Encountered.
The following message is displayed if the information necessary
for the FCG SHOW command is not present on the system.
FCG Exiting: Invalid profile—missing semicolin (;)
A semicolon is required at the end of a profile label and its
parameters. You have failed to enter the semicolon.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE