Xerox 721 Message Manual page 212

SCALE COMMAND MESSAGES
11-4
**Form File, xxxx, cannot be scaled (TL/DL size)**
The SCALE command has been aborted because the resulting
FR6 file is larger than the system allows.
Action None.
**Form font file not found xxxx**
The font file used in the requested form was not found in the
FN6 or LG6 directory.
Action Copy the 600 spi font or logo onto the system and reenter.
or
Use SCALE to create the 600 spi version.
**Illegal switch xxxx**
The requested switch is not permitted in SCALE.
Action Correct and reenter the command.
FST Size: n.n. Header SPI: n.n
Bitmap SPI: same
Bitmap SPI: bit-doubled
Bitmap SPI: interpolated
This message gives the font specification file size and spi
information.
**Lines of different widths not supported**
The requested form consists of a format which cannot be scaled
to 600 spi correctly.
Action None.
**More than one white space character not supported**
The requested form consists of a format which cannot be scaled
to 600 spi correctly.
Action None.
**No dynamic memory**
There is no dynamic memory available.
Action Contact your systems specialist or Xerox Customer Service.
**No input file name specified**
An input file name was not included in the command to invoke
SCALE.
Action Reenter the SCALE command, including the input file name.
(Refer to your 4635 LPS Operations Reference chapter on
managing LPS resources for additional information.)
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE