Xerox 721 Message Manual page 167

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
OS6761 Too many SEF Font mapping errors.
An exceedingly large number of Short Edge Feed font mapping
errors has occurred.
Action 1. Verify proper contents of mapping file and correct.
2. Rerun the job.
OS6780 Unsupported JDL option may jeopardize job integrity.
You have submitted a parameter in a DJDE or PDL command,
such as SESMAP or TRANS, which is not supported by 4050,
4090, 4650 printers. The appearance or position of your output
may be affected.
Action 1. Check your output to see if it is satisfactory.
2. If the output is unsatisfactory, recode the JSL eliminating the
unsupported parameter.
OS6781 Unsupported DJDE option encountered. See OPRINFO Page.
A DJDE option was encountered which is not supported on this
printer.
Action Check OPRINFO page for unsupported option.
OS6782 Paper size exceeds printer capability.
In the PDL OUTPUT command you have specified a larger paper
size than the paper trays of the 4050, 4090, 4650 printers can
accommodate.
Action None.
OS6800 No XCS File specified for 850 job.
You have specified an invalid XCS file for 850 job.
Action Check your XCS file format.
OS6810 No XCS File specified for Ethernet Job.
"Volume Host = ENET" was coded in JDL, but .XCS was not
entered in document-name parameter of CWP,STA[RT]
command. Job will abort.
Action 1. Reenter CWP,STA[RT] command, including .XCS entension in
document name. (Refer to your Xerox LPS Reference
Manual, "Ethernet communications interface" chapter.)
2. Resend job.
OS6819 Improper file format. Record size is not 80 bytes.
The application has specified a disk-resident Ink List, but when
the file is accessed, it is found to be of the wrong format.
Action Check the application.
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-91