Xerox 721 Message Manual page 286

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
Not an AUD File Mgr file, or created by too early an AUD File
Mgr version.
Action If the problem persists, call Xerox Customer Service.
Note xxx does not exist.
The requested note name does not exist.
Action Try entering another note name.
Note xxx is unreadable and cannot be
(deleted/displayed/saved). Call for Service.
The requested note cannot be read and no action can be
performed on it.
Action Call Xerox Customer Service.
Number of AUD File Mgr keys specified invalid for page size.
Action If the problem persists, call Xerox Customer Service.
Number of accelerated files exceeds number of available
AUD File Mgr buffers.
Action If the problem persists, call Xerox Customer Service.
PAG BTEXT signal received before RPT BTEXT signal.
A Page Detail BTEXT signal has been received before a Report
Definition BTEXT signal. This page will not be logged.
Action Check JSL or DJDE in the job stream to ensure that Report
Definition BTEXT precedes Page Detail BTEXT.
Printer Client-Layer is not responding.
Informational message. The system controller is trying
unsuccessfully to establish high-level communication with the
printer.
Printer failed to send configuration.
Informational message. The system controller is trying
unsuccessfully to establish high-level communication with the
printer.
Printer is not answering the Controller's state request.
Informational message. The system controller is trying
unsuccessfully to establish high-level communication with the
printer.
Printer is ready.
Informational message. The 4635 LPS is communicating normally
and is ready to print. There are no existing faults or hints.
4635 LPS ADDITIONAL MESSAGES
15-43