Xerox 721 Message Manual page 199

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
8. PG (PURGE command) messages
These messages may appear during process of purging disk or
print file. Refer to your 4635 LPS Operations Reference for
detailed information about the PURGE command.
PG0100 Processing the entire disk.
The PURGE D command was entered. The system is clearing all
unused areas of the disk, including the print file.
Action None.
PG0110 Purging entirely the following disks:
The listed system disk drives will be purged including any
applicable print files.
Action None.
PG0200 Processing the Print File only.
The PURGE P command was entered. The system is clearing the
print file only.
Action None.
PG0210 Purging the Print Files.
The PURGE command will remove unwanted data from the print
files.
Action None.
PG0215 Purging Print File.
The PURGE command is removing unwanted data from the user's
print file.
Action None.
PG0216 Purging Raster Print File.
The PURGE command is removing unwanted data from the print
file used for rasterization.
Action None.
PG0217 Purging HIP Spool File.
The PURGE command is removing unwanted data from the HIP
spool file.
Action None.
8-1