Xerox 721 Message Manual page 158

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-82
OS6555 Interpress data extraction error.
An error has occurred when the software was decoding
information from the Interpress master for use by the 4635 LPS.
Action 1. Check for additional messages or instructions on the
keyboard display.
2. Contact your systems specialist or Xerox Customer Service if
the problem continues.
OS6560 Error encountered during Interpress job.
An error has occurred while running an Interpress job.
Action 1. Check for additional messages or instructions on the
keyboard display.
2. Contact your systems specialist if the problem continues.
OS6561 Interpress error code = nn.
An error was detected by the Raster Image Processor (RIP). This
error message matches the error message on the Interpress
summary sheet for the document. The only code expected is
375 , which indicates that the page is too complex to print with
8
RIP.
Action 1. Download the RIP software via the PSC RIP command and
resend the document.
2. If the problem continues, contact your systems specialist or
Xerox Customer Service.
OS6562 Ink index out of range.
Ink-index % 0 out of range (1 - % 1).
You have specified an ink that is not available in the ink-index.
Ink-index values range from 1 to n (n is the number of inks in the
ILIST). The system default black ink will be substituted.
Action None.
OS6563 Exceeding ink capability of the printer.
You have requested a highlight color print job that your LPS
cannot process. You may have requested more than two color
inks on a page or a color that the LPS does not have.
Action Check the ink specifications on your job and modify them to
meet the printer's capabilities.
OS6564 Substituting black for this report.
The ink specified for your report is not available, therefore,
automatic ink substitution is taking place.
Action None.
OS6565 Unable to read IDR from disk.
Input cannot access IDR file from disk.
Action Check and retry.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE