Xerox 721 Message Manual page 287

4635 LPS ADDITIONAL MESSAGES
15-44
Printer is reinitializing.
Informational message.
Read error during save.
The record manager has detected a read error during an Audit
Log save operation.
Action If the problem persists, call Xerox Customer Service.
Report definition file read / open error.
The report definition file cannot be opened. Audit Log display or
printing cannot be performed.
Action If the problem persists, call Xerox Customer Service.
Segmented or duplicate attribute not allowed for AUD File
Mgr Autoincrementing key.
Action If the problem persists, call Xerox Customer Service.
Select DOWNLOAD CONTROLLER or enter PSC when you
wish to attempt connection to the Printer
The system controller is currently not able to communicate with
the printer. You can use system controller utilities such as the
Editor, but you cannot print.
Action Select the Download Controller window from the Disks utility or
enter PSC in the command line message window if you want the
system controller to attempt to establish communication with the
printer.
Set Tray Size is unavailable in print
You cannot set tray size while the LPS is printing. Wait until the
LPS cycles down or finishes printing.
Sheet delivery signal but no output phase record exists.
A sheet delivery signal has been received but no output phase
exists for the report. Auditor has not recorded start of output.
Action If the problem persists, call Xerox Customer Service.
Sheet delivery signal but not processing output phase.
A sheet delivery signal has been received but no output phase
exists for the report. Auditor has not recorded start of output.
Action If the problem persists, call Xerox Customer Service.
SOR-input received out of sequence - already in input phase.
A Start Of Report signal has been received from the ESS
beforebefore an End Of Report signal for the preceeding job.
Action If the problem persists, call Xerox Customer Service.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE