Xerox 721 Message Manual page 107

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
OS1590 Generating Ethernet error page
Errors exist in an Ethernet-transmitted job. The system is
compiling error page to be printed at end of the job.
Action 1. Check the Ethernet error page for the location of errors in
the job.
2. If desired, recreate the job.
OS1600 Input task not active
The STOP I command was entered when input was already
inactive (i.e., no job had been sent or started.)
Action None.
OS1610 Output task not active
The STOP O command was entered or the Stop button was
pressed while the system was not printing.
Action None.
OS1620 Local density problem has caused a printer cycle down
A page was encountered with a local density problem; i.e., it
contains a line or lines that are too complex for the system to
process normally. The printer is cycling down to rasterize
(produce a bitmap image of) the page.
Action None.
OS1625 Local density problem rasterization in progress
A page with a local density problem is being rasterized for
printing; i.e., the system is producing a bitmap image of the
page.
Note: This may take from 3 to 20 minutes.
Action Do not press any keys until the process is complete (Message
OS1627 appears).
OS1627 Local density problem rasterization complete
A page with a local density problem has been rasterized; i.e., a
bitmap image of the page has been produced. The printer will
now cycle up and print the problem page.
Action None.
OS1650 Output processing has caught up with input processing
All completed pages of input data have been printed. Output is
waiting for more pages to print.
or
Occurs when N-1 printing is invoked and the entire report has
not yet been formatted.
Action Check that all pages have been printed.
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-31