Xerox 721 Message Manual page 215

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
12.
The following messages refer to the status file services (SFS)
command, which creates, clears, displays, prints, and stores
status file information. Refer to your 4635 LPS Operations
Reference chapters on tracking system activity and managing
system resources for detailed information about the SFS
command.
SF1000 Job completed successfully.
The system has completed internal process required for
requested Status File activity (hardcopy print, save on tape, etc).
Action NONE.
SF1100 Task abort.
The system is unable to complete the SFS task because the status
file is missing or inaccessible.
Action 1. Reenter the SFS command.
2. If the problem recurs, enter the SFS? or SFS CREATE
command to recreate the Status File.
SF1200 Error in user created form file.
The SFS file name command was entered to create a "user-
created" form. A keyword or value in the form was entered
incorrectly (invalid characters, wrong number of characters, etc);
a comma or semicolon is missing between commands; or a
required command is missing. The form will not be produced.
Action Reenter the SFS file name and form commands to retry creating
the form.
SF2000 *Hit any key for more*
The SFS DISPLAY command was entered. The Status File
contains more information than will fit on the system controller
display at one time.
Action Press any key on the keyboard to display additional status
information.
SFS (status file services
command) messages
12-1