Xerox 721 Message Manual page 337

INDEX
Parse failure; unrecognized operator: <n>
Printer Client-Layer is not responding.
Printer failed to send configuration.
Printer is not answering the Controller's
state request.
Printer is ready.
Printer is reinitializing.
Problem with insert file; invalid file folder:
"fileType."
Processing nested too deep.
Property name not found during GETP
operation.
R
Read error during save.
Recovered from system rollover.
Report definition file read / open error.
Requested memory length exceeds
maximum size limit.
Restoring previous file, xxxx, due to error(s).
Run font through fix on CD/IG Version 2
or higher.
S
Scaling bitmap.
Scaling font: xxxx to: yyyy.
Scaling form: xxxx.
Scaling FST entry.
Scaling header.
Scaling logo: xxxx.
Scaling TL numbers.
Scaling TL/DL nn.
Second system rollover.
Segmented or duplicate attribute
not allowed for AUD File Mgr
Autoincrementing key.
Select DOWNLOAD CONTROLLER or
enter PSC when you wish to attempt
connection to the Printer.
Set Tray Size is unavailable in print.
Sheet delivery signal but no output phase
record exists.
INDEX-8
14-16 Sheet delivery signal but not processing
output phase.
15-43
SOR-input received out of sequence -
15-43
already in input phase.
15-43
SOR-output received out of sequence -
already in output phase.
15-43
Specified color not implemented.
15-44
Specified file does not exist.
14-16
String off paper on page n at
<nn.nnn>,<nn.nnn> [inches];
14-17 <nn.nnn>,<nn.nnn> [cm].
14-17 Substituting n point (rotated n degrees)
characters.
"SYS>IPFNTS" invalid; recompile
"JSL>IPFNTS."
15-44
System does not handle graphics.
14-18
System has insufficient disk space to format
log xxxx. Convert or Print request has
15-44
been cancelled.
14-9
T
11-5
Target filename already exists.
11-5
The Current Log is empty.
The Current Log is in use and cannot be
emptied.
The Current Log is unreadable and cannot
11-5
be(emptied/deleted/printed/displayed/saved).
11-5
Call for Service.
11-5
The Current Log is unreadable and cannot
be(emptied/deleted/printed/displayed/saved).
11-5
Use a backup log.
11-6
The diskette has insufficient space. The
11-6
System is unable to save the log.
11-6
The Note file format is invalid. Delete the
Note and resave with valid data, then retry
11-6
the operation.
14-9
There are no Hints (*).
15-44
The UI and system are not synchronized.
Finish jobs and reboot the system.
The UI has reached its memory limit. All
15-44
windows and menus are being closed to
restore memory.
The UI is reaching its memory limit. Close
15-44
any windows or menus that are not being used.
15-44
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
15-44
15-44
15-45
14-6
15-45
14-6
14-12
14-18
14-3
15-45
15-45
15-45
15-45
15-45
15-46
15-46
15-46
15-46
15-46
15-46
15-46