Xerox 721 Message Manual page 143

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
OS3005 Unusable sheets cleared to sample tray.
The printer is purging any pages that are damaged or have poor
print quality. Pages will be delivered to the sample tray and
printing will resume where it was stopped.
The printer control console displays:
PRINTER IS CLEARING UNUSABLE SHEETS
Action Discard pages delivered to the sample tray.
Note: This message may also be displayed after abnormal
termination of the previous job.
OS3006 Possible extra page in output. See printer message.
A duplex job was interrupted by a paper jam. A page printed on
only one side may have been purged by the system and sent to a
stacker tray.
The printer control console displays one of the following:
CHECK OUTPUT TRAY 1 FOR EXTRA ONE-SIDED PAGE.
PRESS i.
CHECK OUTPUT TRAY 2 FOR EXTRA ONE-SIDED PAGE.
PRESS i.
CHECK SAMPLE TRAY FOR UNUSABLE SHEETS.
Action Check stacker and sample trays for an unusable one-sided page
and discard it.
Note: This message may also be displayed after abnormal
termination of the previous job.
OS3007 Check output--Dry ink may not be sticking to paper.
The fuser may not be maintaining the temperature necessary for
dry ink to adhere to paper.
The printer control console displays:
CHECK OUTPUT. IF ACCEPTABLE, PRESS CONTINUE. IF NOT
CALL SENIOR OPERATOR.
PRINTER FAULT. DRY INK MAY NOT BE ADHERING TO PAPER.
PRESS i
Action 1. Check printed output.
2. If output is acceptable, press the <CON> key or the
Continue button on the printer to resume printing.
or
If print quality is degraded, contact your systems specialist or
Xerox Customer Service.
OS3008 Transparencies loaded--print simplex to sample tray.
Transparencies were loaded in selected tray. JSL did not specify
simplex printing or delivery to the sample tray. The job will not
print.
The printer control console displays:
JOB CANNOT BE PRINTED. SEE MESSAGE AT CRT.
Action 1. Recode JSL, including required specifications.
2. Restart the job.
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-67