Xerox 721 Message Manual page 44

IFU (INTERPRESS FONT UTILITY) MESSAGES
5-6
IF2025 Unknown parameter on ADD command
One of the parameters (descriptive elements) in the ADD
command is incorrect.
Action Check the ADD command and reenter it correctly.
IF2030 Command not recognized
An invalid IFU command has been entered.
Action Reenter a valid IFU command.
IF2032 Wildcarding not permitted
Wildcarding is not allowed in the Interpress font family name for
this command.
Action 1. Reenter the command without wildcard characters in the
Interpress font family name.
2. Retry the command.
IF2036 Wildcarding has found a match
A match has been found with the wildcarded Interpress font
family name requested in the IFU COPY READ command before
end of volume was reached.
Action Mount the next volume to continue searching
or
Discontinue the operation.
IF2040 MOVE command was stopped by end of volume
During execution of the IFU MOVE command, the number of
files to be moved passed the end of volume.
Action 1. Enter the IFU medium LIST command to display the number
of items stored on the medium.
2. Reenter the MOVE command with a valid number of files to
be moved.
IF2042 Invalid number of files have been specified to move
An incorrect number of files to be moved has been given.
Action Check the number of items on the medium, and enter a valid
number of files to move.
IF2050 Please mount the next volume, number x
This message instructs you to mount the next tape or cartridge
volume. A message will then ask if you want to continue or
abort the operation.
Action 1. Mount the tape or cartridge number indicated in the
message.
2. Enter C to continue.
or
Discontinue the operation.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE