Xerox 721 Message Manual page 162

Laser printing system
Hide thumbs Also See for 721:
Table of Contents

Advertisement

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-86
OS6713
DJDE processing error: filetype file not found messages.
The file specified by DJDE of the type indicated in the message
was not found on the system disk. Depending on JSL coding for
handling error conditions, one of the following occurs:
Error = Stop
Job is interrupted, and message "INPUT STOPPED, ENTER CON I
OR ABORT I" appears.
Action
Enter the CONTINUE I command to resume input (DJDE is
ignored) or ABORT I command to cancel the job.
Error = Abort
Job automatically aborts.
Action
1. Do one of following: Recode DJDE with a different file name.
(Refer to your 4635 LPS PDL/DJDE Reference or your 4635
LPS Operations Reference chapter on using the editor for
additional information.) Load the desired file to disk.
2. Restart the job.
Error = Continue
Printing continues and no further messages are displayed.
Action
If the job prints unsatisfactorily, follow instructions for ERROR =
ABORT, above.
OS6713
DJDE processing error: Font File not found.
OS6714
DJDE processing error: Form File not found.
OS6715
DJDE processing error: PDE File not found.
OS6716
DJDE processing error: Form Font not found.
OS6717
DJDE processing error: CME File not found.
OS6718
DJDE processing error: Invalid Font File header.
OS6719
DJDE processing error: Invalid Form File header.
OS6720
OTEXT length exceeds limit...OTEXT ignored.
The operator message included in DJDE exceeds the maximum
length of 80 characters per page or 400 per report. The message
will not print.
Action
1. If desired, restate the OTEXT message, shortening it. (Refer
to your 4635 LPS PDL/DJDE Reference.)
2. Restart the job.
OS6721
DJDE processing error: invalid loadable PDE.
The PDE file loaded from magnetic tape has an incorrect format.
The job will not print correctly.
Action
1. Enter the ABORT command to cancel the job.
2. Recompile PDE correctly. (Refer to your 4635 LPS PDL/DJDE
Reference.)
3. Reload the PDE file to the system disk. (Refer to your 4635
LPS PDL/DJDE Reference.)
4. Restart the job.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE

Advertisement

Table of Contents
loading

This manual is also suitable for:

4635

Table of Contents