Xerox 721 Message Manual page 227

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
Font problem; regarding n point (rotated n degrees) font
"interpressFontName"...
This is the general font problem message which precedes several
other messages and is issued when font problems are found
during text processing.
Form file not found: "fileType>fileName."
When processing an SIF, no file with the name filename.filetype
was locally available to the 4635 LPS.
Action Load the form on the LPS or change the form reference in the
document and resend the document.
Further "No font for output character set ..." messages
suppressed.
Many ... no font for output character set ... messages have
been issued; further occurrences will not be reported.
Imaging operator <operatorName> available only with RIP
option.
The identified imaging operator is implemented in conjunction
with the Raster Image Processor (RIP) option.
Action 1. Remove the object from the document which caused the
error.
2. Resend the document.
Overlapping form copy ranges on one page.
Multiple forms per page were requested and the LPS does not
have the Raster Image Processor (RIP) option.
Action 1. Merge the multiple forms into a single FSL.
2. Reference the new form file in the document.
3. Resend the document.
System does not handle graphics.
The LPS does not support GHO/GVG, or GHO/GVG and the JSL
have the option GRAPHICS = NO specified.
Unexpected error detected by RIP <I/O error code: nB>.
An error was found by Raster Image Processor (RIP) in processing
the page. The only code which is expected is 3758, which
indicates that the page was too complex for RIP.
Action 1. Download the Raster Image Processor (RIP) software via the
PSC RIP command.
2. Resend the document.
3. If the problem continues, contact your systems specialist or
Xerox support.
Note: In this message, the letter "B" indicates an octal value.
SUMMARY SHEET ERROR MESSAGES
14-3