Xerox 721 Message Manual page 51

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
IF2402 No CCID parameter has been specified
No CCID (character code identifier) parameter has been specified
in the font profile.
Action 1. Enter a CCID parameter in the font profile.
2. Reenter the ADD command.
IF2408 CHARS parameter was not found in IPFONTS statement
The IPFONTS statement in the font profile does not contain the
CHARS (enumeration or range of point sizes) parameter.
Action 1. Enter the CHARS parameter in the IPFONTS statement of the
font profile.
2. Reenter the ADD command.
IF2410 Orientation parameter was not found in DCFONTS statement
Orientation (i.e., PORTRAIT, LANDSCAPE, IPORTRAIT, and
ILANDSCAPE) has not been specified in the DCFONTS statement
in the font profile.
Action 1. Correct the DCFONTS statement to include the desired
orientation parameter.
2. Retry the ADD command.
IF2412 Point size was not found in DCFONTS statement
Point size is not specified in the DCFONTS statement of the font
profile.
Action 1. Reenter the DCFONTS sequence to include point size.
2. Retry the ADD command.
IF2414 Files parameter was not found in DCFONTS statement
No FILES parameter is specified in the DCFONTS statement in the
font profile.
Action 1. Correct the DCFONTS statement to include the FILE
parameter.
2. Retry the command.
IF2416 DCCHARS parameter x was not found in DCFONTS statement
The indicated DCCHARS parameter is not included in the
DCFONTS statement of the font profile.
Action 1. Correct the DCFONTS statement to include the DCCHARS.
2. Retry the command.
IF2420 Label missing on MAP statement
The MAP statement in the font profile must contain a label.
Action Reenter the MAP statement to include a label.
IFU (INTERPRESS FONT UTILITY) MESSAGES
5-13