Xerox 721 Message Manual page 194

PDL (JOB SOURCE LIBRARY COMPILATION) MESSAGES
7-2
PD0300 Nothing to print, PDL terminated.
When PDL encounters a problem before it starts compiling the
JSL file, it will display this message and exit. The JSL file was not
processed at all.
Action None.
PD0500 No source file will be created.
A source file cannot be created due to an unspecified error.
Action Check the file and make corrections, if needed. (Refer to your
4635 LPS PDL/DJDE Reference.)
PD0510 Source file is full.
1000 records (maximum allowable) have been written to the
source file.
Action Copy records to disk and compile them.
PD0900 Abort requested by operator.
The ABORT command was entered. The PDL task will be
cancelled.
Action None.
PD1000 PDL terminated.
End of Job Source Library has been reached.
Action None.
PD1050 Exiting PDL to print.
JSL has been successfully compiled. The system will print a
listing of JSL.
Action None.
PD1100 ***JSL CONTAINED ERRORS***
Job Source Library contained some incorrect entries.
Action 1. Check the specified feature setting.
2. Edit JSL entries.
3. Recompile JSL. (Refer to your 4635 LPS PDL/DJDE
Reference.)
PD1110 JSL contains unsupported features.
There are features invoked in the JSL which are not currently
supported by the 4135.
Action None.
PD1200 Use the IFU IPFNTS Command to compile IPFNTS.
PDL no longer supports the interpress font mapping feature.
Use IFU for that purpose.
Action None.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE