Table of Contents
Advertisement
[Startup and Maintenance Precautions]
CAUTION
● Do not place the Simple Motion board or servo amplifier on metal that may cause a power leakage or
wood, plastic or vinyl that may cause static electricity buildup. Doing so can cause malfunction or
failure of the Simple Motion board.
[Operating Precautions]
CAUTION
● When changing data and operating status, and modifying program of the running Simple Motion
board, read relevant manuals carefully and ensure the safety before operation. Incorrect change or
modification may cause system malfunction, damage to the machines, or accidents.
● Do not power off or reboot the personal computer while the setting values in the buffer memory are
being written to the flash ROM in the Simple Motion board. Doing so will make the data in the flash
ROM undefined. The values need to be set in the buffer memory and written to the flash ROM again.
Doing so also can cause malfunction or failure of the Simple Motion board.
● Note that when the reference axis speed is specified for interpolation operation, the speed of the
partner axis (2nd, 3rd, or 4th axis) may exceed the speed limit value.
● Do not go near the machine during test operations or during operations such as teaching. Doing so
may lead to injuries.
[Disposal Precautions]
CAUTION
● When disposing of this product, treat it as industrial waste.
[Transportation Precautions]
CAUTION
● The halogens (such as fluorine, chlorine, bromine, and iodine), which are contained in a fumigant
used for disinfection and pest control of wood packaging materials, may cause failure of the product.
Prevent the entry of fumigant residues into the product or consider other methods (such as heat
treatment) instead of fumigation. The disinfection and pest control measures must be applied to
unprocessed raw wood.
● The Simple Motion board is a precision machine, so do not drop or apply strong impacts on it.
6
Advertisement
Table of Contents
