Table of Contents
Advertisement
MMC_Controller::InitializeParameter
Returns the data set in the buffer memory/internal memory and flash ROM/internal memory (nonvolatile) to their initial factory
values.
unsigned long InitializeParameter(
void
);
Detailed description
■Parameter
None.
■Return value
Value
MMC_OK
MMERR_DEV_UNOPEN
MMERR_TIMEOUT_01
MMERR_CONDITION_USER_PROGRAM_READY_ON
MMERR_CONDITION_BUSY_ON
■Point
• This method uses the "Parameter initialization function" of the Simple Motion board.
• This methods waits inside the method until "[Cd.2] Parameter initialization request" becomes "0".
• It takes a maximum of approximately 20 seconds for parameters initialization.
■Supported version
API version
1.00
■Reference
None.
3 API LIBRARY DETAILS (BASIC FUNCTIONS)
40
3.2 MMC_Controller Class
Description
Function succeeded
The Open method of the device driver class has not been called.
The timeout time (30 seconds) has elapsed.
User program READY signal [Y0] is ON.
BUSY signal [X10 to X1F] are ON.
Software version
01
Advertisement
Table of Contents
