Table of Contents
Advertisement
[Installation Precautions]
CAUTION
● Use the Simple Motion board in an environment that meets the general specifications in the Simple
Motion Board User's Manual. Failure to do so may result in electric shock, fire, malfunction, or
damage to or deterioration of the product.
● Fix the Simple Motion board securely with the board-fixing screw. Tighten the screws within the
specified torque range. Undertightening can cause drop of the screw, short circuit, or malfunction.
Overtightening can damage the screw and/or Simple Motion board, resulting in drop, short circuit, or
malfunction. For the tightening torque of the board-fixing screws, refer to the manual supplied with the
personal computer.
● Do not directly touch any conductive parts and electronic components of the Simple Motion board.
Hold the front panel or edge of the print board. Not holding by the front panel or edges may cause
malfunction or failure of the Simple Motion board.
● Do not disassemble or modify the Simple Motion board. Doing so may cause failure, malfunction,
injury, or a fire.
● Before handling the Simple Motion board, touch a conducting object such as a grounded metal to
discharge the static electricity from the human body. Failure to do so may cause the Simple Motion
board to fail or malfunction.
● Install the Simple Motion board to a personal computer which is compliant with PCI Express
standard. Failure to do so may cause a failure or malfunction.
● Securely insert the Simple Motion board into the slot following the board installation instruction of the
personal computer. Incorrect insertion of the Simple Motion board may cause malfunction, failure, or
drop of the board.
● When installing the Simple Motion board, take care not to contact with other boards.
● When installing the Simple Motion board, take care not to get injured by an implemented component
or a surrounding member.
● Handle the Simple Motion board in a place where static electricity will not be generated. Failure to do
so may cause a failure or malfunction.
● The Simple Motion board is included in an antistatic envelope. When storing or transporting it, be sure
to put it in the antistatic envelope. Failure to do so may cause a failure or malfunction.
● Do not drop or apply a strong impact to the Simple Motion board. Doing so may cause a failure or
malfunction.
[Wiring Precautions]
WARNING
● Shut off the external power supply (all phases) used in the system before installation and wiring.
Failure to do so may result in electric shock or damage to the Simple Motion board.
● After installation and wiring, attach the cover of the equipment the Simple Motion board is installed to
before turning it on for operation. Failure to do so may result in electric shock.
3
Advertisement
Table of Contents
