I/O Monitor Display - Mitsubishi Electric MELSERVO-J5 Series User Manual

2.
Set the sampling time, trigger, and other areas as required, then start measurement.
3.
The waveform is displayed on completion of measurement. The obtained data can be checked by clicking "Zoom",
"Cursor", and other buttons.
MR Configurator2 with software version 1.110Q or later supports saving data in GX LogViewer format (JSON file) with the
graph function or drive recorder function. The file is saved with a ".json" extension by default.

I/O monitor display

The I/O signals of the servo amplifier, on/off status of the I/O device, and voltage of the analog monitor can be displayed. The
input/output status of the signals and wiring can be checked at device startup and throughout the project creation progress.
5 MONITORING
322
5.2 Checking with MR Configurator2