Windows 8.1; Windows 10; Windows 7/8.1/10 - Olivetti d-Color MF4003 Service Manual

d-Color MF4003/MF3303
2. Utility tool
2.1 IC card information setting tool of card reader
2.1.1 Outline
• Before connecting a card reader to the MFP, it is necessary to prepare an IC card information setting file with the loadable driver.
• To prepare this file, a tool is used for preparing the IC card information setting file for use in each card reader.
Card reader
AU-201S
SCL-010
OMNIKEY 5427CK (AU-205H)
YSoft
System requirement of tools
OS
Library (Any of these needs
to be installed)
Hard disk
Display
2.1.2 IC card information setting procedures
(1) Setting IC card information in the loadable driver in advance
(a) Auth Device Tool Advanced for AU-201/AU-201S
1. Obtain the loadable driver (ICC_LDR.tar) for use in AU-201S
2. Start the Auth Device Tool Advanced for AU-201/AU-201S.
3. Select [Import Loadable Driver] from [File] and select the loadable driver.
4. Select card type.
5. If the card is good for detailed settings, click [Detail Setting/Extra Data Setting].
6. Input the necessary extended data. (For details, ask the IC card administrator.)
7. Select Loadable Driver in [Export Format] and click [Export].
8. Select the loadable driver to be updated and the output location of the loadable driver and click [OK].
9. Copy the output loadable driver (ICC_LDR.tar) to the root directory of the USB memory.
NOTE
▪ Please do not save any other data in the USB memory.
10. Call the Service Mode to the screen of the MFP.
11. Select [System 2] -> [Driver Install] -> [Install].
12. Connect the USB memory in which the loadable driver has been saved to the USB port on the side of the control panel.
13. Select [Loadable driver] and touch the [Start] to install the loadable driver.
14. Remove the USB memory and, accessing [Billing Setting] -> [Authentication Device 2], select [Card].
15. Turn OFF the main power switch, wait for 10 sec., then turn the switch ON.
16. Set the authentication user.
(b) Auth Device Tool Advanced for SCL-010
1. Obtain the loadable driver (ICC_LDR.tar) for use in SCL-010
2. Start the Auth Device Tool Advanced for SCL-010.
3. Select card type.
4. Select Loadable Driver in [Export Format] and click [Export].
5. Select the loadable driver to be updated and the output location of the loadable driver and click [OK].
6. Copy the output loadable driver (ICC_LDR.tar) to the root directory of the USB memory.
NOTE
▪ Please do not save any other data in the USB memory.
7. Call the Service Mode to the screen of the MFP.
8. Select [System 2] -> [Driver Install] -> [Install].
9. Connect the USB memory in which the loadable driver has been saved to the USB port on the side of the control panel.
10. Select [Loadable driver] and touch the [Start] to install the loadable driver.
11. Remove the USB memory and, accessing [Billing Setting] -> [Authentication Device 2], select [Card].
12. Turn OFF the main power switch, wait for 10 sec., then turn the switch ON.
13. Set the authentication user.
(c) Auth Device Tool Advanced for 5427CK (Setting: TypeA/HID Prox/Multiple)
NOTE
▪ Selecting [Multiple] makes cards of HID Prox, HID iCLASS and TypeA available at the same time.
1. Obtain the loadable driver (ICC_LDR.tar) for use in OMNIKEY 5427CK (AU-205H)
2. Start the Auth Device Tool Advanced for 5427CK (AU-205H).
3. Select card type. (Except for HID iCLASS)
Service Manual
Auth Device Tool Advanced for AU-201/AU-201S
Auth Device Tool Advanced for SCL-010
Auth Device Advanced for 5427CK (AU-205H)
Auth Device Tool Advanced for YSoft CRv2/YSoft CRv3
• Windows 7

• Windows 8.1

• Windows 10

Support both 32-bit (x86) and 64-bit (x64) editions.
• Microsoft .Net Framework2.0 SP2
• Microsoft .Net Framework3.0 SP2
• Microsoft .Net Framework3.5 SP1
• Microsoft .Net Framework3.5.1
3 MB or more free space is required
800 x 600 pixels,16 bit full color
IC card information setting file preparation tool
that is compatible with the type of card used.
that is compatible with the type of card used.
that is compatible with the type of card used.
D-2
D SERVICE TOOL > 2. Utility tool
Y119930-3