Mode - Olivetti d-Color MF4003 Service Manual

Multifunction digital copier
Hide thumbs Also See for d-Color MF4003:
Table of Contents

Advertisement

d-Color MF4003/MF3303
1.17.2  Power key
[1]
Power key
(1)  Power key functions
• The power key offers two functions, serving as the power save button and the sub-power switch found in conventional models,
depending on how long it is held down.
• In the default setting, holding down the power key for a short time sets the machine into the power save mode (low power mode) and
holding it down for a long time sets the machine into the sub power OFF mode.
• The mode can be changed from the following: [Administrator] -> [Maintenance] -> [Timer Setting] -> [Power Settings].
How long the power key is
held down
Short time
Long time
• *1: [Administrator] -> [Maintenance] -> [Timer Setting] -> [Power Settings] -> [Power Key Setting]
• *2: [Administrator] -> [Maintenance] -> [Timer Setting] -> [Power Settings] -> [Power Save Settings]
(2)  Status in each mode
[1]
[2]
[1]
Power key LED
[3]
Control panel

Mode

Standby
Power save
Low power
mode
mode
Sleep mode
(*2)
(Not reduce)
Sleep mode
(*2)
Service Manual
Default setting
Low power mode (*2)
Sub power OFF mode
All functions are ready to accept and ready to perform jobs.
• Power consumption is limited to a level lower than the standby state with
the fusing temperature control minimized.
• Reset when a job is received or the machine is operated.
• Power consumption is reduced in low power mode.
• Sensors that are used internally are operating.
• Power is supplied only to a portion of the base board required for
receiving a job.
P THEORY OF OPERATION > 1. d-Color MF4003/MF3303
[1]
-
-
Settings changed by Administrator Settings
Sleep mode (*2)
Sub power OFF mode (*1)
ErP auto power off mode (*1)
[3]
[2]
Power key
[]
State
P-64
Power key LED
Lit up blue
Blinking in blue
Blinking in blue
Y119930-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D-color mf3303

Table of Contents