Olivetti d-Color MF4003 Service Manual page 214

d-Color MF4003/MF3303
Setting item
Password Set the password used to access the relay server.
NOTE
▪ Once a password is set, be sure not to forget it. It is required for reset.
▪ Please refer to " I.18.2.2 (6) Auto update by relay
(3) Log TX settings
Update File Download/Update Log
• Save the update file download log for auto update of the machine, and send it to the specified location.
ON
OFF
<Procedure>
• When [ON] is selected, configure the settings for transmission protocol.
For SMB
Setting item
Host Name Set the host name for the SMB server.
File Path Set the file path used in the SMB server communication.
User Name Set the user name used to access the SMB server.
Password Set the password used to access the SMB server.
For WebDAV
Setting item
URL Set the address of the WebDAV server.
User Name Set the user name used to access the WebDAV server.
Password Set the password used to access the WebDAV server.
Proxy Select whether to use the proxy server.
• If [ON] is selected, set the proxy with [Administrator] -> [Network] -> [Machine Update Settings] -> [HTTP Proxy
Relay Update File Download Log
• Save the log related to update relay data download for the relay server, and send it to the specified location.
ON
OFF
<Procedure>
• When [ON] is selected, configure the settings for transmission protocol.
For SMB
Setting item
Host Name Set the host name for the SMB server.
File Path Set the file path used in the SMB server communication.
User Name Set the user name used to access the SMB server.
Password Set the password used to access the SMB server.
For WebDAV
Setting item
URL Set the address of the WebDAV server.
User Name Set the user name used to access the WebDAV server.
Password Set the password used to access the WebDAV server.
Proxy Select whether to use the proxy server.
• If [ON] is selected, set the proxy with [Administrator] -> [Network] -> [Machine Update Settings] -> [HTTP Proxy
(4) Log Confirmation
• Check the log related to update file download for auto update of the machine or update relay data download for relay server.
• The latest five logs can be checked.
(5) Immediate Update
• To conduct Machine Auto Update manually.
• It will be displayed if all of the following settings are met.
• [Administrator] -> [Network] -> [Machine Update Settings] -> [Machine Auto Update setting] -> [Auto Update Settings for This
Machine] is set to "ON."
• This is displayed when the update file for auto update settings has been downloaded in MFP storage.
<Procedure>
Service Manual
Setting item
Settings].
Setting item
Settings].
H UTILITY MODE > 12. Supplementary explanation of utility mode
Contents
server" for the file path of relayed data.
Contents
Contents
Contents
Contents
H-46
Default setting
○
Default setting
○
Y119930-3