Olivetti d-Color MF4003 Service Manual page 136

d-Color MF4003/MF3303
[2]
[1]
[1] [2]
[3] [1]
[1]
[2]
7. To reinstall, reverse the order of removal.
4.4.7 Scanner motor (M9)
1. Remove the rear cover.
F.4.1.3 Rear cover
2. Remove the ADF.
F.4.2.9 ADF
3. Remove the scanner upper cover.
F.4.1.8 Scanner upper cover
[2]
[2] [3]
[1]
Service Manual
[1]
F DISASSEMBLY/REASSEMBLY > 4. d-Color MF4003/MF3303
2. Disconnect the connector [1].
3. Remove the harness from two wire saddles [2].
4. Remove three screws [1], and disconnect the ground wire.
5. Remove the belt [2], and remove the document main motor assy [3].
6. Remove two screws [1], and remove the document main motor [2].
4. Slide the CIS module assy [2] to the position shown in the illustration while
holding the belt [1].
5. Remove the belt [3] from the pulley [2] while pressing on the position [1] shown
in the illustration.
F-38
Y119930-3