Olivetti d-Color MF4003 Service Manual page 240

d-Color MF4003/MF3303
• To notify the Center, select the notification item to the Center.
Setting item
No Notification
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
NOTE
▪ Multiple items of data can be selected and sent at one time. However, be sure that only EKC data cannot be sent together
with other items of data.
8.1.8 Server Setting
(1) E-Mail1 or E-mail2 is selected
Server for RX
Setting item
POP3 Server To set the POP3 server address used for the CS Remote Care.
It can be set by the IP address or the domain name.
• Input IP Address: Input in version 4 format.
• FQDN input: Enter the domain name.
POP3 Login Name To set the login name for the POP3 server used for the CS Remote Care.
POP3 password To set the logon password for the POP3 server used for the CS Remote Care.
POP3 Port Number To set the POP3 port number used for the CS Remote Care.
Receive
Setting item
E-Mail Address To set the e-mail address used for the CS Remote Care.
Mail Check To set whether or not to use mail check and the time interval for the POP server
used for the CS Remote Care.
Connection Time-out To set the timeout period for connection during reception.
APOP Authentication To set whether or not to authenticate the APOP during reception.
Send
Setting item
SMTP Server To set the SMTP sever address for transmission used for the CS Remote Care.
It can be set by the IP address or the domain name.
• Input IP Address: Input in version 4 format.
• FQDN input: Enter the domain name.
SMTP port Number To set the SMTP port number for transmission used for the CS Remote Care.
Service Manual
Select it to disable the report to the center.
Sales count data
Error count data
Service count data
Life count data, Life cycle data
CSRC-System data, Device config data
History data
EKC data
Adjustment data
Coverage data
Not used
Not used
Not used
Contents
Contents
Contents
Contents
I-24
I SERVICE MODE > 8. CS Remote
Setting value Default setting
Input IP Address
[0 to 255].[0 to 255].
[0 to 255].[0 to 255]
FQDN input
Alphanumeric
characters and
symbols (up to 63
characters)
Alphanumeric
characters and
symbols (up to 64
characters)
Alphanumeric
characters and
symbols (up to 15
characters)
1 to 65535 110
Setting value Default setting
Alphanumeric
characters and
symbols (up to 129
characters)
No
○
1 to 120 min
30 to 300 Sec 60 Sec
Yes
No
○
Setting value Default setting
Input IP Address
[0 to 255].[0 to 255].
[0 to 255].[0 to 255]
FQDN input
Alphanumeric
characters and
symbols (up to 63
characters)
1 to 65535 25
Y119930-3
-
-
-
-
-
-
-