Olivetti d-Color MF4003 Service Manual page 172

d-Color MF4003/MF3303
4. Utility
4.1 Information
Key name
Device Information
Change User Password
Synchronize User Auth. and
Account Track
Function Permission Information When conducting user authentication (ON (MFP), External Server Authentication, or Main + External Server),
Network Setting Information
Print Setting Information
Print Information
Change E-Mail Address
Change PIN Code
4.2 System Settings
Key name
Measurement Unit Setting -
Auto Tray Selection -
Settings
Paper Tray Setting Auto Tray Switch ON/OFF -
No Matching Paper in Tray
Setting
Print Lists
Auto Color Level -
Adjustment
Power Settings Low Power Mode Setting
Sleep Mode Setting
d-Color Remote
This will be displayed when an Android tablet device is connected.
Access Setting
AE Level Adjustment
Blank Page Print Settings
Service Manual
-
• When conducting user authentication (MFP only), it will be displayed when the authentication is
complete.
• When conducting user authentication or account track input, it will be displayed when login is
authenticated as user box administrator.
• When [Password Rules] which can be displayed by [Administrator] -> [Security] -> [Security Details] is
set to "Enable", password using the single letter or the password same with the previous one, less than
8-digit will not be modified.
• When [Administrator] -> [Security] -> [Enhanced Security Mode] is set to "ON," entering the incorrect
password three times will cause access lock.
• When conducting user authentication (ON (MFP), External Server Authentication, or Main + External
Server), it will be displayed only when the authentication is complete.
• It will be displayed when [Administrator] -> [User Authentication/Account Track] -> [Authentication Type] -
> [Synchronize User Authentication / Account Track] is set to "Synchronize by User."
it will be displayed only when the authentication is complete.
-
Set as Default -
Font Information -
Macro List -
ICC Profile List -
PCL Setting -
PS Setting -
TIFF Setting -
Security Setting -
OOXML Print Settings -
Page Layout Settings -
-
• When conducting user authentication (MFP only), it will be displayed when the authentication is
complete.
• It will be displayed when [Administrator] -> [Security] -> [Administrator Security Levels] is set to "Level 2."
It will be displayed when a user PIN code is set in [Administrator] -> [User Auth/Account Track] -> [User
Authentication Setting] -> [User Registration].
-
• It will not be displayed when [Service Mode] -> [Billing Setting] shows that [Authentication Device2] is
mounted.
• It will not be displayed when [Service Mode] -> [Billing Setting] -> [Management Function Choice] is set to
"Vendor 2." (It will be displayed when the key counter is mounted.)
• It will be displayed when setting other than "Restrict" is selected in [Administrator]
• It will not be displayed when [Service Mode] -> [Billing Setting] -> [Management
• The upper limit can be set up to 240 min. only when the switch number "157" is
• It will be displayed when [Administrator] -> [Security] -> [Administrator Security Levels] is set to "Level 2."
• It will not be displayed when [Service Mode] -> [Billing Setting] -> [Management Function Choice] is set to
"Vendor 2."
• It will be displayed when [Administrator] -> [Security] -> [Administrator Security Levels] is set to "Level 2."
Function/Precondition
Function/Precondition
-> [Security] -> [Administrator Security Levels].
Function Choice] is set to "Vendor 2."
specified to "02" at HEX assignment by setting [Service Mode] -> [System 2] ->
[Software Switch Setting].
H-4
H UTILITY MODE > 4. Utility
Y119930-3