Olivetti d-Color MF4003 Service Manual page 61

d-Color MF4003/MF3303
(2) Scanning section
Scanning method
Scanning resolution
Mixed original
Density selection
Maximum scanning document width
Maximum scanning document length
Effective scanning range
Automatic reduction at sending
Rotation transmission
Page division at sending
Halftone
Automatic background control (ABC)
(3) Recording section
Recording
Recording paper size
Recording paper cassette
Staple
Recording speed
Recording size
Maximum reception length
Reduction record
Page separation record
Offset output at each communication
Rotation reception
Two-sided reception
2-in-1 reception
Y119930-3
Platen documents Impossible to scan book documents (book mode)
DF book documents
Normal
Fine
Super fine
Ultra fine 600 dpi x 600 dpi
• Selection by using the [Resolution] key.
• You can not change settings on every page.
Possible to mix documents of different sizes.
• After rotation of images, sizes are changed by EOM every time the length of the scan line is
changed at sending.
• Possible to mix sizes (A and B).
Selection by using the [Density] key. [Light] / [Standard] / [Dark]
• You can not change settings on every page.
297 mm (A3 width) both for DF and Platen
Regular mode
Long original mode of DF
When a document is smaller than the effective scanning area, the area outside the document is
erased.
• DF scanning: left, right, head and bottom mask of 3 mm each (0 to 5 mm)
• Platen scanning: left, right and head mask of 2 mm each (fixed)
A3 -> B4, A3 -> A4 and B4 -> A4
• Automatically reduced and sent in accordance with the recording paper size of remote
station.
A4 / Letter size only. LEF documents are rotated by 90 degrees at sending to send it in SEF
direction.
No
256 level error diffusion
• Users can change settings by using the [Text], [Text/Photo, Printed], [Text/Photo,
PhotoPaper], [Photo, Printed], [Photo, PhotoPaper], [Dot Matrix Original] or [Copied Paper]
key.
Yes
Laser electrostatic printing system
• All sizes except for B6 and Postcard (See the copier basic specifications.)
• Auto recording paper selection
• Note: A5 and B5 paper is used only for A5 and B5 reception respectively
• Tray 1 to Tray 4
• Manual bypass tray
• LCT
No
Compliant to the copier standards
A3 size maximum
• A3 fix as reception record ability declaration in protocol.
1,000 mm
• In case of being larger than the maximum reception length, a communication error occurs.
• When the memory over occurs during reception, the received data is printed.
When the received image information is larger than the recording paper, it is automatically
reduced to the recording paper size and recorded.
Yes
Yes (Job unit reception only)
Yes
• Images are rotated by 90 degrees and recorded on the recording paper in LEF direction.
Yes (Utility Mode)
No
C-7
C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS
• Print: inch
• Scanning mode: 1-Sided, 2-Sided and cover + 2-Sided
• Possible to scan the DF mixed size documents.
• 8 lines/mm x 3.85 lines/mm
• 200 dpi x 100 dpi
• 8 lines/mm x 7.7 lines/mm
• 200 dpi x 200 dpi
• 16 lines/mm x 15.4 lines/mm
• 400 dpi x 400 dpi
• 431.8 mm
• 17 inch
• 1,000 mm
• Originals with unlimited length are not available.
Service Manual