Olivetti d-Color MF4003 Service Manual page 265

d-Color MF4003/MF3303
10.5.22 SW No.188
• Operation setting for print status LED
Bit Assignment
00000001
00000010
10.5.23 SW No.203
• Setting to automatically change log-in authorization to a second user when the second user attempts card authentication after a first user
has been authenticated through card authentication.
Bit Assignment
00000000
00000100
10.5.24 SW No.206
• Setting whether to enable Coverage Counter
Bit Assignment
00000000
00000001
Reference
• [Service Mode] -> [Billing Setting] -> [Coverage Rate Clear], [Print Counter Clear], [Coverage Counter Detail]
10.5.25 SW No.226
HEX 10
• Setting for allowing/prohibiting use of fax mis-sending prevention function when line is used by TEL terminal connection devices
Bit Assignment
00000000
00010000
HEX 80
• Setting for allowing/prohibiting use of functions to allow administrator to change PBX function settings when an external line button is added
for direct input of an address with the PBX function enabled
Bit Assignment
00000000
10000000
10.5.26 SW No.227
• Setting for the display of consumable level and warning. (Control panel, Web Connection, Fiery)
Bit Assignment
00000000
10000000
10.5.27 SW No.230
HEX 08
• Setting for the display of consumable level and warning. (PSES, MIB, Printfleet, SiteAudit)
Bit Assignment
00000000
00001000
HEX 40
• Setting for allowing/prohibiting use of functions for preventing a unintentional sending to a wrong destination
Bit Assignment
00000000
01000000
10.6 CCD Calibration
Front side/back side
• To set whether to use the calibration adjustment value set prior to the shipping. To display the current calibration adjustment value.
Y119930-3
HEX Assignment
00 Blinking
02 Unlit
HEX Assignment
00 Log-in not authorized.
04 Log-in authorized.
HEX Assignment
00 Disable
01 Enable
HEX Assignment
00 Do not use functions for preventing fax mis-sending.
10 Use functions to prevent fax mis-sending.
HEX Assignment
00 Do not use the functions.
80 Use the functions.
HEX Assignment
00 Display
80 Do not display
HEX Assignment
00 Display
08 Do not display
HEX Assignment
00 Do not use the functions.
40 Use the functions.
Details
Details
Details
Details
Details
Details
Details
Details
I-49
I SERVICE MODE > 10. System 2
Default value (Bit/HEX)
00000001 / 01
Default value (Bit/HEX)
00000000 / 00
Default value (Bit/HEX)
00000000 / 00
Default value (Bit/HEX)
00010000 / 10
Default value (Bit/HEX)
10000000 / 80
Default value (Bit/HEX)
10000000 / 80
(Japan/North America/
Europe)
00000000 / 00
(Others)
Default value (Bit/HEX)
00001000 / 08
(Japan/North America/
Europe)
00000000 / 00
(Others)
Default value (Bit/HEX)
01000000 / 40
Service Manual