Olivetti d-Color MF4003 Service Manual page 657

d-Color MF4003/MF3303
(1) Wired+Wireless (Secondary Mode)
NOTE
▪ To awake from the ErP Auto Power Off mode, select [Awake with ARP + Unicast Communication].
1. The machine waits for a startup indication that is sent via the wireless LAN communication.
2. Receive a startup command from a client via the wireless LAN communication without via the wireless LAN access point to start up the
machine.
• Receiving a startup indication from a PC to start up the main unit.
• Receiving a communication from a mobile device to start up the main unit.
Diagram of startup operation
[1]
[1] Startup indication *1
[2] Job received from a mobile device
[3] Machine (on startup)
• *1: To execute a print job, [Wake-On-Lan setting] is required to configure at [Initial settings] of a printer driver.
3. After the machine starts up, execute a job that is received from a client.
• Execute a job received from a PC via the LAN.
• Execute a job received from a PC via the wireless LAN communication.
• Execute a job received from a mobile device via the wireless LAN communication.
Diagram of operation after startup
[1]
[1]
[1] Job received from a PC
[2] Job received from a mobile device
[3] Machine (after startup)
(2) Wired+Wireless (Primary Mode), Wired+Wireless (Wi-Fi Direct)
NOTE
▪ To awake from the ErP Auto Power Off mode, select [Awake with ARP + Unicast Communication].
1. The main body waits for a startup indication sent via the wireless LAN communication.
Y119930-3
[1] [2]
[3]
[2]
[3]
P-83
P THEORY OF OPERATION > 7. UK-221
Service Manual