Olivetti d-Color MF4003 Service Manual page 138

d-Color MF4003/MF3303
[2]
[1]
[1] [3]
6. To reinstall, reverse the order of removal.
4.5.2 Tray 1 paper feed clutch (CL3)
1. Remove the rear cover.
F.4.1.3 Rear cover
2. Open the right door.
3. Remove the IDC sensor assy.
F.4.7.1 IDC sensor (IDCS1)
4. Remove the paper feed unit.
F.4.2.6 Paper feed unit
[2] [1]
[5] [6] [4] [3]
8. To reinstall, reverse the order of removal.
4.5.3 Registration clutch (CL4)
1. Remove the rear cover.
F.4.1.3 Rear cover
2. Open the right door.
3. Remove the IDC sensor assy.
F.4.7.1 IDC sensor (IDCS1)
4. Remove the paper feed unit.
F.4.2.6 Paper feed unit
[1]
[3] [2]
Service Manual
3. Remove two screws [1], and remove the plate [2].
4. Remove the E-ring [1].
5. Disconnect the harness from the two holes [2], and remove the bypass tray
paper feed clutch [3].
[2]
5. Remove the harness from the wire saddle [1], and disconnect the connector
[2].
6. Remove the harness from the edge cover [3] and the harness guide [4].
7. Remove the E-ring [5], and remove the tray 1 paper feed clutch [6].
5. Remove the harness from the wire saddle [1] and the harness guide [2], and
disconnect the connector [3].
F DISASSEMBLY/REASSEMBLY > 4. d-Color MF4003/MF3303
F-40
Y119930-3