Olivetti d-Color MF4003 Service Manual page 412

d-Color MF4003/MF3303
Step
2 Open and close the front door of the main body.
1.9.8 99-06
Contents
JAM type Controller JAM (print control on the main body is not completed)
JAM code 99-06
JAM detection timing
Misfeed processing
location
Relevant parts
Procedure
Step
1 Initial check items
2 Open and close the front door of the main body.
1.9.9 99-07
Contents
JAM type Controller JAM (main body not completing a job)
JAM code 99-07
JAM detection timing
Misfeed processing
location
Relevant parts
Procedure
Step
1 Initial check items
2 Open and close the front door of the main body.
Service Manual
Action
99-06 Print control is not completed even after a job has been completed.
Action
99-07 The engine does not stop after a lapse of a given time after that a print has finished.
Action
Control signal
-
-
-
Control signal
-
-
-
-
Control signal
-
-
L-14
L TROUBLESHOOTING > 1. JAM CODE
Location of electrical component
-
Location of electrical component
-
-
Location of electrical component
-
-
Y119930-3