Olivetti d-Color MF4003 Service Manual page 305

d-Color MF4003/MF3303
16.6 Communication
Protocol
Setting item
V8/V34 Protocol To set whether or not to use the V.8/V.34 protocol.
V17 EP TONE Whether the EP tone (Echo Protect: 2100Hz) is added to the top of the training
signal.
This setting is displayed only when "Line1" is selected.
V29 EP TONE Whether the EP tone (Echo Protect: 2100Hz) is added to the top of the training
signal.
This setting is displayed only when "Line1" is selected.
V17 Selection Mode V.34 is not used when a dash (-) is added at the top of dial number.
"-" This setting is displayed only when "Line1" is selected.
ANSam Send Time To set the transmission time for the V.8 protocol signal ANSam.
Usually not need to be changed.
This setting is displayed only when "Line1" is selected.
Int'l Comm. Function
Setting item
Foreign To set whether or not to use the mode that employs the number of DIS waiting
Communication times.
Function
No. of DIS Waiting To set the number of DIS waiting times.
Times at Foreign
Communication
V34 Speed To set the V.34 international communication mode speed.
V17 Speed To set the V.17 international communication mode speed.
V29 Speed To set the V.29 international communication mode speed.
TIMER1
Setting item
T1 T1 timer (T.30 standard)
• Calling: Designate by the response waiting timer
• Called: Starts after DIS is output. The waiting time until DCS is received.
Response waiting timer (55sec)
• Calling: Starts after dialing. Until CED is received.
DCS-TCF DELAY To set the delay time between DCS and TCF. (*1)
CED-DIS DELAY To set the delay time between CED and DIS. (*2)
PIX-PMC DELAY To set the delay time between PIX and PMC. (*3)
• *1: DCS-TCF DELAY
CED DIS
• *2: CED-DIS DELAY
CED DIS
• *3: PIX-PMC DELAY
Y119930-3
Contents
Contents
Contents
DCS TCF PIX PMC
PMC: Post Message Command
DCS TCF PIX PMC
PMC: Post Message Command
I-89
I SERVICE MODE > 16. FAX
Setting value Default setting
ON
OFF
ON
OFF
ON
OFF
ON
OFF
1.0 to 5.5 s 4.0 s
(Step: 0.5 s)
Setting value Default setting
ON
OFF
1
2
16800 to 33600 bps 28800 bps
(Step: 2400 bps)
7200 to 14400 bps 7200 bps
(Step: 2400 bps)
2400 to 9600 bps 4800 bps
(Step: 2400 bps)
Setting value Default setting
30 to 90 s
(Step: 5 s)
50 to 150 ms 80 ms
(Step: 10 ms)
50 to 150 ms 80 ms
(Step: 10 ms)
50 to 150 ms 80 ms
(Step: 10 ms)
Service Manual
○
○
○
○
○
○
35 s