Olivetti d-Color MF4003 Service Manual page 677

d-Color MF4003/MF3303
3. When CNG is not detected for a given period (Default is 20 seconds. Changeable by address parameters), this function stops external
ringer transmission and becomes fax reception after the voice response message 2 is sent.
4. This function detects OFF-HOOK of the external telephone during external ringer transmission only.
5. When OFF-HOOK of the external telephone is detected during external ringer transmission, the line is connected to the external
telephone. Even if you use the telephone, you can manually switch to the fax reception after that.
6. When CNG is detected during the above-mentioned external ringer transmission, External ringer transmission is stopped and the fax
reception starts.
Line seizure
2 seconds
(1)
(c) Related FP
No. FP
1 Tel-Fax switching
2 RBT transmission
time
3 Tel-Fax switching
parameter
4 Tel-Fax switching
parameter
5 Tel-Fax switching
parameter
8.2.2 F-code
• F-code is a function to realize confidential transmission / bulletin board polling / relay transmission by using SUB, SEP and SID signals.
• To be more specific, a machine which can open "a box" on the memory is called "a F code compliant center machine" and a machine which
can access to a center machine by using the F code function is called "a F-code compliant machine." The center machine can have plural
"boxes" and they are used as the confidential box, bulletin board box and relay box respectively.
• Function outline is as follows.
Function Outline
Confidential Sent to the center machine
transmission which opens a confidential
box by appointing the
confidential box No. (The
center machine has
memory reception to the
confidential box.)
Bulletin By appointing a box No. in
board polling the center machine which
opens a bulletin board,
contents are polled.
Relay Requesting relay to the
transmission relay machine which opens
a relay box (No.) in which a
broadcasting transmission
remote station is
registered.
• ○ = interact is required
• △ = selectable
• × = do not use
Y119930-3
CNG detection term
Voice response
message 1
External ringer
External phone off-hook
detection term
4 seconds
(2) (3)
Meaning and purpose
TEL/FAX switching mode
RingBackTone signal
transmission time
Time from vocal response
to RBT transmission (CNG
detection waiting time 2)
Time from reception to
voice response
transmission (CNG
detection waiting time 1)
TEL/FAX switching ON
response details
Signals to be used
SUB SEP SID
○ ×
× ○
○ ×
Fax reception
Voice response
started,
message 2
ANsam sent
Address Value
0x0e0095 0: Disabled
bit5 1: Enabled
0x0e00fc unit: 1000 ms, HEX
0x0e0095 0: 4 sec.
bit7 1: 2 sec.
0x0e0095 0: 2 sec.
bit6 1: 4 sec.
0x0e0095 0: Voice response + RBT
bit3 transmission
1: RBT transmission only
Use (Meaning)
• SUB = Appointment of
△
a confidential box
• SID = Password
SEP = Appointment of a
×
bulletin board box
• SUB = Appointment of
○
a relay box (No.)
• SID = Password
P-103
P THEORY OF OPERATION > 8. FK-517
Default
0 Those with a Administrator
Settings
0x14 (20 • A serviceman setting
sec.) by address setting
• Those with a
Administrator Settings
30 sec. or less: 5 seconds
30 sec. or more: 30
seconds
0 A serviceman setting by
address setting
0
0 Those with a Administrator
Settings
Required function
Registration = Message Each box No. =
adding Contents of a signal
(20 digits or less)
• Registration =
Message overwriting
• With a mode which is
not deleted by polling.
Note
Remark
Service Manual