Olivetti d-Color MF4003 Service Manual page 238

d-Color MF4003/MF3303
Setting item
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
NOTE
▪ Multiple items of data can be selected and sent at one time. However, be sure that only EKC data cannot be sent together
with other items of data.
Center/Device ID
• It will be displayed when or "http1," "http2," "Modem" or "Fax" is selected in System Setting.
Setting item
Center ID Set the center ID.
When all setup procedures are completed, the center ID is displayed.
Device ID Display the device ID.
It can only be displayed but not be changed.
Client Settings
• It will be displayed when "http1" or "http2" is selected in System Setting.
• To set whether or not to encrypt communication.
• When all setup procedures are completed, the details of setting is displayed.
Yes
No
Heart Beat
• It will be displayed when "http1" is selected in System Setting.
• To make Heart Beat related settings.
• Heart Beat is a feature that uploads a Heart Beat file to the registered web server at a specified interval to report that the device is
operating. Heart Beat files include total counter and status information.
Setting item
Communication To set whether or not to enable Heart Beat communication.
Comm. Interval Set the communication interval to enable Heart Beat communication.
Specified To set whether or not to enable Heart Beat transmission at a specified interval. Yes
Transmission
Polling Interval
• It will be displayed when "http1" is selected in System Setting.
• To set the polling time in http communication.
1 to 256 (minutes)
Center Telephone Number, Device Telephone Number
• It will be displayed when "Modem" or "Fax" is selected in System Setting.
• Set the telephone number of the Center.
• Set the telephone number of the Device.
NOTE
▪ When entering the telephone number, 10-key and keys on the screen have following meanings.
Keys
[-] Pose
[W] Wait
[T] Tone dial
[P] Pulse dial
[*], [#]
Service Manual
Error count data
Service count data
Life count data, Life cycle data
CSRC-System data, Device config data
History data
EKC data
Adjustment data
Coverage data
Not used
Not used
Not used
Setting value
Setting range
Waits to start transmitting after dialing
Detects the dial tone of the other end
Carry out tone dialing
Carry out pulse dialing
To be used as necessary
Contents
Contents
Contents
Contents
I-22
I SERVICE MODE > 8. CS Remote
Setting value Default setting
5-digit
alphanumeric
characters
13-digit
alphanumeric
characters
Default setting
○
Setting value Default setting
Yes
No
1 to 256 (minutes) 30 (minutes)
No
Default setting
5 (minutes)
Y119930-3
00000
-
○
○