Olivetti d-Color MF4003 Service Manual page 184

d-Color MF4003/MF3303
6.3.32 ADF original skew adj.setting
Key name
ADF original skew adj.setting
6.3.33 Def. operation mode set.
Key name
Def. operation mode set.
6.3.34 Paper Size/Type Settings Screen Display
Key name
Paper Size/Type Settings
Screen Display
6.4 Security
Key name
Certificate Verification Settings
Limiting Access to Destinations -
Restrict User Access
Copy security
Auto Logout
Administrator Password Setting When [Administrator] -> [Security] -> [Security Details] -> [Password Rules] is enabled, the following
Copy Program Lock Settings
Delete Saved Copy Program
Administrator Password Change
Permission Setting
User Box Administrator Setting
Administrator Security Levels
TX Operation Log Setting
Security Details
Service Manual
It will be displayed when the ADF is installed.
-
-
-
Registering and • It will not be displayed when [Service Mode] -> [Billing Setting] ->
Changing Addresses
• If [Administrator] -> [Security] -> [Enhanced Security Mode] is set to "ON,"
Biometric/IC Card
Information Registration
Changing the "From"
• The [Biometric/IC Card Information Registration] key displays if [Authentication
Address
Synchronize User
Authentication / Account
Track By User • The [Synchronize User Authentication / Account Track By User] key displays
Restrict Program
Function Setting
Multiple Addresses
Restriction Setting
Add Dest. Button
Select All Groups
Changing Job Priority
Delete Other User Jobs
Changing Zoom Ratio
Change Registered
Overlay
It will be displayed when the security kit is mounted.
-
passwords cannot be accepted: password of single repeated characters, password same as the one before
being changed, and password where the number of characters is less than the minimum number specified in
[Set Minimum Password Length].
-
-
-
It will be displayed when carrying out the user authentication as well account track.
It will not be displayed when [Service Mode] -> [Billing Setting] -> [Management Function Choice] shows that
the "Vendor 2" is mounted.
To print the saved sending operation logs or save them in USB memory, select [Administrator] -> [System
Settings] -> [List/Counter] -> [TX Operation Log Output].
Password Rules • This setting cannot be enabled when [Service Mode] -> [Enhanced Security] ->
• If [Administrator] -> [Security] -> [Enhanced Security Mode] is set to "ON,"
• When the password rule is enabled, the password cannot be changed or
ProhibitFunctions • If [Administrator] -> [Security] -> [Enhanced Security Mode] is set to "ON,"
• For details of the functions, refer to "
Function/Precondition
Function/Precondition
Function/Precondition
Function/Precondition
[Management Function Choice] shows that the "Vendor 2" is mounted.
selecting [Allow] for [Registering and Changing Addresses] cancels enhanced
security mode.
Device2] is mounted via [Service Mode] -> [Billing Setting], and [Administrator]
-> [User Auth/Account Track] -> [Authentication Type] -> [User Authentication]
is set to "ON (MFP)."
when [Administrator] -> [User Auth/Account Track] -> [Authentication Type] ->
[Synchronize User Authentication / Account Track] is set to "Synchronize by
User."
[CE Authentication] is set to "OFF." "OFF" cannot be set for [CE Authentication]
when [Password Rules] is enabled.
disabling this setting cancels enhanced security mode.
registered unless it follows the above conditions.
selecting "Mode1" in this setting cancels enhanced security mode. Only the
number of times for trials up to the access lock can be changed.
H-16
H UTILITY MODE > 6. Administrator
H.12.3.1 ProhibitFunctions."
Y119930-3