Olivetti d-Color MF4003 Service Manual page 267

d-Color MF4003/MF3303
7. Using the "binary" command, set the File transfer mode to the binary transfer.
8. Using the "get" command, transfer the data for capture to PC.
9. Finish the command prompt.
NOTE
▪ After receiving capture data, select [Administrator] -> [Security] -> [Security Details] -> [Print Data Capture], and select [Restrict]
for the print data capture setting in order to delete the job data stored in the MFP storage.
▪ When Storage Format or Overwrite Temporary Data is performed, job data is deleted.
10.8 Network Fax Settings
• To set whether or not to use network fax function.
• To set when using network fax function.
• Selection will be available when each network fax function is set to "ON" in [Administrator] -> [Network] -> [Network Fax Setting] ->
[Network Fax Setting].
Setting item
IP Address Fax
Internet Fax
10.9 RX File Change Page Name
• To set whether to change the document file name to forward TX or take out a file from the Memory RX Box.
Change
Y119930-3
ON
OFF
ON
OFF
Setting value
Setting value
I-51
I SERVICE MODE > 10. System 2
Default setting
○
○
Default setting
Service Manual