Olivetti d-Color MF4003 Service Manual page 362

d-Color MF4003/MF3303
14. Select [Service Mode] -> [Billing Setting] -> [License Management].
15. Select [Activation] -> [Function Code] or [License Code], and enter the function code and the license code confirmed at Step13.
<When activating with an USB memory>
Connect the USB memory to the USB port on the side of the control panel, and select [Activation] -> [USB].
16. Touch [Apply].
17. Follow the massage appearing on the screen and turn OFF and ON the main power switch.
<When activating with an USB memory>
This step is unnecessary. Proceed to the next step.
18. Select [Service Mode] -> [Billing Setting] -> [License Management] -> [Function List], and confirm that the activated function is displayed at
the list.
1.6.2 Deactivation
• To deactivate i-Option functions.
• To deactivate i-Option functions due to registration error, expiration of lease term, change to other MFP or etc.
• The functions can be deactivated by selecting the desired function and enter the appropriate deactivation code.
NOTE
▪ You need to access License Management System (LMS) to implement each function setting.
▪ Before accessing the LMS, CE are required to register the E-mail address and the password in the LMS. To register, click [CE
Initial Registration] that is located in the upper right of CE Login screen.
<Procedure>
1. Check the serial number of the target MFP.
Service Manual
J BILLING SETTING/ENHANCED SECURITY/DEBUG SETTINGS > 1. BILLING
J-8
SETTING
Y119930-3