Olivetti d-Color MF4003 Service Manual page 660

d-Color MF4003/MF3303
8. FK-517
8.1 COMMUNICATION CONTROL
8.1.1 FIF bits of DIS, DTC and DCS
NOTE
▪ Considered to be A4 width when the DIS recording paper width is invalid (1, 1).
Becomes a FIF error when the DCS recording paper width is invalid (1, 1).
▪ Considered to be unlimited when the DIS recording paper length is invalid (1, 1).
Considered to be unlimited when the DCS recording paper length is invalid (1, 1).
The DCS recording paper length in a machine is made to be of the same length as that in a remote station and is sent.
▪ Considered to be 2400 bps when the DIS transmission speed is an undefined value.
Becomes a FIF error when the DCS transmission speed is an undefined value.
▪ Considered to be 40ms instruction when the MSLT of DCS is an undefined value.
▪ Considered to have mm ability when DIS inch ability and mm ability are both set to OFF.
Considered to be 200x100 pels/inch when the DCS resolution receives the inch instruction at 3.85 l/mm.
Becomes a FIF error when more than one of bit41, 42 and 43 are set to on in the resolution of DCS.
▪ Becomes a FIF error when DCS receives the MMR instruction without ECM.
▪ Becomes a FIF error when DCS receives the file transfer (BFT) instruction without ECM.
▪ Becomes a FIF error when DCS shows an instruction which exceeds the ability of the machine.
▪ FIF of DIS/DTC is not sent if last octet is 0.
DCS sends FIF whose length is the same as that of the machine.
▪ When undefined signals are received, they are received and ignored in consideration of the future expansion. (not an error)
(1) FIF data configuration list (DIS/DTC)
(a) Octet 4
bit
1 T.37 Internet fax (Simple mode)
2 Reserved
3 T.38 real time Internet fax
4 Third generation mobile network
5 Reserved
6 V.8 ability
7 ECM frame
8 Reserved
(b) Octet 5
bit
9 Ready for polled transmission
10 Receiver ability
11 Transmission speed ability
12
13
14
15 R8×7.7 l/mm and/or 200×200 pels/25.4 mm
16 Two-dimensional coding ability
• @: Changes to 0 or 1 according to a status of devices.
• *1: Transmission speed ability (bit 11, 12, 13 and 14)
11 12 13
0 0 0
0 1 0
1 0 0
1 1 0
1 1 0
(c) Octet 6
bit
17 Recording paper width ability
18
Service Manual
Function
Function
14 Contents
0 V27 ter fall back mode
0 V27 ter
0 V29
0 V27 ter & V29
1 V27 ter & V29 & V17
Function
Contents
1: 64 octet
0: 256 octet
Contents
1: polled transmission documents exist
0: no polled transmission documents
1: Reception is possible.
0: Reception is impossible.
Refer to *1.
1: MR
0: MH
24
48, 24
96, 72
96, 72, 48, 24
144, 120, 96, 72, 48, 24
Contents
bit 17, 18
0,0=A4
0,1=A3
1,0=B4
P-86
P THEORY OF OPERATION > 8. FK-517
Transmission speed
Y119930-3
Default
0
0
0
0
0
0
0
0
Default
@
@
1
1
0
1
1
1
Default
0
1