Olivetti d-Color MF4003 Service Manual page 60

d-Color MF4003/MF3303
*4: Creases must be smoothed out. (amount of float: 15 mm (9/16 inches) or less)
10mm
20mm
(3) Prohibited originals
• Prohibited originals that cause trouble
Sheets stapled or clipped together
Book original
Sheets with paper attached
Sheets clipped or notched
Torn paper
Original weighing less than 35 g/m
Significantly curled original (amount of curl exceeding 15 mm (9/16 inches))
OHP film
Label sheet
Offset master paper
Glossy photographic paper or glossy enamel paper
1.2 FK-517
1.2.1 Basic specifications
(1) General specifications
Applicable lines
Protocol
Maximum data rate
Coding method
Modulation method
Communication resolution
Fax memory size
FAX memory backup
Communication time
Resolution conversion
Service Manual
Type of original
2 2
(9 5/16 lb) or 128 g/m (34 1/16 lb) or more
PSTN, PBX
Group 3 (compliant to ITU-T T.30)
• ECM
• F-code communication
• Olivetti non-standard protocol: No
• Group 4: No
33,600 bps
• MH
• MR
• MMR
• JBIG
• V.27 ter
• V.29
• (V.33): V.33 is for reception only.
• V.17
• V.8
• V.34
Normal
Fine
Super fine
Ultra fine
• Fixed to mm at transmission (except 600 dpi)
• mm and inch are available at reception.
• Selection by using the [Resolution] key.
• You can not change settings on every page.
• 128 GB (128 GB in the main body storage is used as a memory.)
• 10,000 pages can be stored including all Scan/Box/Printer/Fax documents.
Image data is saved in main body storage.
Level of 2 seconds (Olivetti standard A4 chart, 33,600 bps)
At sending
At receiving (mm)
At receiving (inch)
C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS
• 8 lines/mm × 3.85 lines/mm
• 200 dpi x 100 dpi
• 8 lines/mm × 7.7 lines/mm
• 200 dpi x 200 dpi
• 8 lines/mm × 15.4 lines/mm (only for reception)
• 16 lines/mm × 15.4 lines/mm
• 400 dpi x 400 dpi
600 dpi x 600 dpi
• Scanner: inch
• Density conversion: inch -> mm
• Communication: mm / inch (600 dpi only)
• Density conversion: mm -> inch
• Print: inch
• Density conversion: inch -> inch
C-6
Y119930-3